Select your vehicle

Omix-ADA Dana 30 Pinion Oil Seal – 16521.17

Omix-Ada

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Replacement front pinion oil seal for Dana 30 front axles
  • Fits the 2002–2007 Jeep Liberty (KJ)
  • Keeps gear lube inside the differential where the pinion passes through the housing
  • Omix-Ada part number 16521.17, UPC 804314134129

Description

Overview

The Omix-Ada 16521.17 is a front pinion oil seal for the Dana 30 front axle on the 2002–2007 Jeep Liberty (KJ). The seal sits at the pinion, where the driveshaft yoke enters the differential, and holds gear oil inside the housing. Omix-Ada markets it as a direct-fit replacement for owners dealing with gear oil seeping around the front pinion.

A pinion seal is a wear item because it has to hold lubricant around a turning shaft. Replacing a worn seal stops that leak and keeps the gear oil level where the front gears need it.

Key features

  • Replacement pinion oil seal, marketed by Omix-Ada as a high-quality replacement
  • Designed to keep gear lube inside the differential
  • Front position, Dana 30 front axle application
  • Direct fit for the 2002–2007 Jeep Liberty (KJ).

Signs of a worn pinion seal

The pinion seal rides on the pinion yoke as it turns, so any wear on the yoke or the seal lip can let gear oil escape. A leak usually shows as oil on the inside of the differential housing, on the driveshaft yoke or on the frame below the front axle. A slow weep often becomes heavier over time.

When the seal is replaced, the yoke surface should be smooth and free of grooves, since a grooved yoke can quickly damage a new seal. Check the pinion nut and preload if the seal is being replaced at the same time as the bearings. Refill the front differential to the correct level after the work, and watch for leaks on the first few drives.

  • Inspect the yoke for grooves or rust
  • Clean the housing face before fitting the seal
  • Check gear oil level after the first drive

Specifications

Brand Omix-Ada
Part number 16521.17
UPC 804314134129
Axle Dana 30
Position Front
Fitment type Direct fit

Vehicle fitment

It fits the 2002–2007 Jeep Liberty (KJ) with a Dana 30 front axle. Check your year, model and trim before ordering.

The 2008–2012 Liberty (KK) is not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One pinion oil seal. No other parts are named.

SKU: OAI16521.17 Category:

Specification

Shipping weight 0.25 lbs
Package dimensions 3.60 × 3.60 × 1.50 in
brands

Fitment

VehicleYearsTrims
Jeep Liberty (KJ)2002–200765th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Omix-Ada 16521.17 fit a 2002 to 2007 Jeep Liberty?

Yes. It fits the 2002–2007 Jeep Liberty (KJ) with a Dana 30 front axle. Confirm your vehicle's year, model and trim before ordering.

Is the 16521.17 a front or rear pinion seal?

It is a front pinion seal for the Dana 30 front axle, so it applies to the front differential rather than the rear.

Does this seal keep gear oil inside the differential?

Yes. It is designed to keep gear lube inside the differential around the pinion for the Dana 30 front axle.

How long does a pinion seal usually last?

Service life depends on use, driving conditions and how well the yoke surface is kept. A seal often lasts a long time, but mud and water exposure off-road can speed wear. Replace it when a leak appears, and check the yoke for grooves at the same time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon