Overview
The Omix-ADA Clutch Release Bearing, part number 16906.02, is a replacement clutch release bearing for 1980 to 1986 Jeep CJ7 and 1980 to 1983 CJ5 models, plus the 1981 to 1985 Jeep Scrambler. It fits GM 2.5L, 4.2L 258, 304 and 360 V8 and 2.1 Renault diesel engines.
The bearing rides on the release fork and presses against the diaphragm spring when the clutch pedal is pushed. Omix-ADA makes it to original specifications and backs it with a limited five year manufacturer warranty.
Key features
- Covers GM 2.5L, 4.2L 258, 304 and 360 V8 and 2.1 Renault diesel applications
- Built to original specifications as a direct fit replacement
- It covers the CJ5, CJ7 and Scrambler trims noted in the fitment below.
- Limited five year manufacturer warranty
Release bearing service
The release bearing rides on the clutch fork and presses the diaphragm spring fingers when the pedal goes down. Because it spins only while the clutch is disengaged, wear usually appears as a chirp or growl when the pedal is pressed, or as a pedal that feels rough.
When the bearing is out, check the fork fingers for grooves, inspect the pivot, and look at the pilot bearing in the crankshaft, which often wears alongside the release bearing. Keep grease off the clutch disc, since oily friction surfaces slip. Release bearing replacement often means transmission removal on these vehicles, so plan the job with the other clutch parts in mind.
- Look for a chirp when pressing the pedal
- Check fork fingers for wear grooves
- Replace the pilot bearing if it is worn
- Keep grease off the clutch disc
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | OAI16906.02 |
| Part type | Clutch release bearing |
| Engine applications | GM 2.5L, 4.2L 258, 304 and 360 V8, and 2.1 Renault diesel |
| Fitment type | Direct fit |
| Warranty | Limited five year manufacturer warranty |
Vehicle fitment
It fits the following vehicles:
- 1980–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1980–1986 Jeep CJ7 (Base, Golden Hawk, Laredo, Limited, Renegade)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
The list covers 1980 to 1986 models only, so earlier CJ years, Cherokee and Wrangler models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the clutch fork and pivot for wear while the bearing is out. Release bearing replacement often requires transmission removal on these vehicles, so plan the job accordingly.
What’s included
One clutch release bearing.









