Overview
The Omix-ADA clutch fork boot, part number 16918.03, is a boot that sits at the bellhousing on 6 and 8 cylinder engines. It is a direct OE replacement built to original specifications by Omix-ADA.
The boot measures 4 in x 4 in square, so check the bellhousing opening on your engine against that size before fitting it.
Bellhousing boot care
A clutch fork boot covers the fork pivot at the bellhousing and keeps road grit, water and clutch dust out of the moving parts. When it tears or hardens, the fork and pivot ball are exposed, which can lead to uneven release, squeal and faster wear on the throwout bearing area. Heat from the engine and clutch makes rubber boots age faster than many owners expect.
Before fitting a replacement, clean the bellhousing opening and the fork pivot ball, then compare the new boot’s opening and lip with the old one. Check the fork for play, rust or grooves, because a worn ball will wear a new boot quickly. Apply a light coat of compatible grease to the pivot as the job allows, and keep it away from the clutch friction surfaces.
After installation, check that the boot seats evenly around the bellhousing and that the fork moves without binding.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16918.03 |
| UPC | 804314027285 |
| Engine application | 6 and 8 cylinder |
| Size | 4 in x 4 in square |
| Location | At the bellhousing |
| Warranty | It carries a limited five year warranty from Omix-ADA. |
Vehicle fitment
It is a direct OE replacement for Jeep vehicles. Compatibility depends on your engine size and bellhousing, so confirm your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The boot is the item described; no clamps, hardware or additional parts are mentioned.









