Overview
The Omix-Ada 16919.03 is a clutch pedal return spring for Jeep CJ5, CJ6, CJ7 and Scrambler models. It fits the 1972 to 1983 CJ5, 1972 to 1975 CJ6, 1976 to 1986 CJ7 and 1981 to 1985 Scrambler.
A return spring pulls the clutch pedal back up after it is released. This spring has a compressed length of 7-1/2 inch, measured end hook to end hook.
Key features
- Direct OE replacement built to original specifications
- Compressed spring length of 7-1/2 inch
- Measured end hook to end hook
- Omix-Ada part number 16919.03
Pedal return and spring fatigue
The return spring holds the clutch pedal at its top stop and helps the fork and linkage return after each press. When the spring weakens, the pedal can sit low or drift, and the clutch may not fully release. Off-road driving, with repeated pedal work in stop-and-go conditions, loads the spring and its pivot points more than highway use.
Inspect the spring for stretched coils, rust, and a hook that has worked loose. Check the pedal pivot bushing at the same time, since a worn bushing lets the pedal rock side to side and changes how the spring loads. A spring replacement is a small job, but it is worth inspecting the linkage pins and clips as well.
- Look for rust or flattened coils
- Check hook ends for wear
- Inspect the pedal pivot bushing
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16919.03 |
| UPC | 804314033644 |
| Part type | Clutch pedal return spring |
| Compressed spring length | 7-1/2 inch, end hook to end hook |
| Fit type | Direct fit |
Vehicle fitment
Omix-Ada places this spring on the following vehicles:
- 1972-1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1972-1975 Jeep CJ6 (Base)
- 1976-1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- 1981-1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
Years outside these ranges do not fit this spring, including the 1986 Scrambler.
Confirm your vehicle’s year, model and trim before ordering.














