Overview
The Omix-ADA 16919.25 is a hydraulic clutch slave cylinder return spring for Jeep CJ5, CJ7 and Scrambler models. Compare it with your original spring for design, material and dimensions before fitting.
Replacing a worn return spring
A return spring helps the hydraulic slave cylinder pull the clutch release back after each engagement. When it weakens, the release can drag slightly, which shows up as hard shifting or a pedal that comes back slowly. Because the spring is small, its effect on clutch feel is easy to miss until wear has built up.
Before replacing it, check the slave cylinder body, pushrod and boot for leaks or wear, since a leaking cylinder can mimic spring trouble. Compare the new spring with the original by eye and by feel before installing. Bleed the hydraulic clutch afterward and confirm the pedal returns smoothly through its full range.
- Inspect the slave cylinder for leaks
- Check the pushrod for bends or wear
- Compare the spring with the original
- Bleed the clutch after installation
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16919.25 |
| UPC | 804314027391 |
| Part type | Hydraulic clutch slave cylinder return spring |
Vehicle fitment
It fits 1980–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), 1980–1986 CJ7 (Base, Golden Hawk, Laredo, Limited, Renegade) and 1981–1985 Scrambler (Base, Laredo, Renegade, SL, SR).
CJ5 model years after 1983 are not shown. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The return spring only.









