Select your vehicle
-13%

Moog Tie Rod End Adjusting Sleeve – ES2079S

Moog

$17.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 9:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Tie rod end adjusting sleeve with any necessary hardware
  • Alloy steel with a corrosion-resistant coating
  • Fits Ford, Jeep and Mazda models from 1980 to 2006
  • Moog part number MOGES2079S

Description

Overview

The Moog ES2079S is a tie rod end adjusting sleeve for a wide range of Ford, Jeep and Mazda trucks and SUVs, including the 1980-1996 Ford Bronco, 1991-2001 Jeep Cherokee and 1997-2006 Jeep Wrangler. The sleeve joins two tie rod ends and lets the steering linkage length be set for alignment.

The sleeve is made of alloy steel with a corrosion-resistant coating, and design changes aim to extend life and simplify replacement.

Key features

  • Alloy steel construction for durability
  • Coated for corrosion resistance
  • Includes any necessary hardware
  • Direct-fit replacement
  • Broad coverage across Ford, Jeep and Mazda models

Measuring and setting length

Before removing the old sleeve, measure its length from center to center of the tie rod ends or mark the thread position. Matching that length gives a close starting point for toe, though a final alignment is still needed. Thread the new sleeve on evenly so both ends engage the same number of threads.

Older Ford, Jeep and Mazda linkages often show corrosion at the sleeve threads and clamp areas. Clean the threads with a wire brush and apply anti-seize only where it suits the clamp. Tighten the clamps and jam nuts once the length is set, and recheck them after the first few drives.

  • Mark the thread position before removal
  • Clean the threads before fitting
  • Re-check toe after the first drive

Specifications

Brand Moog
Part number MOGES2079S
Part type Tie rod end adjusting sleeve
Material Alloy steel
Finish Corrosion-resistant coating
Hardware Includes any necessary hardware
Fit type Direct fit

Vehicle fitment

It fits the 1980–1996 Ford Bronco, 1984–1990 Bronco II, 1991–1994 Explorer and Explorer Sport, 1980–1983 F-100, 1980–1997 F-150, 1993–1995 F-150 Lightning, 1980–1997 F-250, 1997 F-250 HD, 1980–1997 F-350, 1983–1997 Ranger, 1991–2001 Jeep Cherokee, 1991–1992 Comanche, 1993–1998 Grand Cherokee, 1997–2006 Wrangler, 1994–1997 Mazda B2300, 1994–1996 B3000, 1994–1997 B4000 and 1991–1994 Navajo.

The Jeep entries are listed by model and years only, so newer Cherokee, Grand Cherokee and Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Setting the sleeve changes the length of the steering linkage, so a full wheel alignment should follow any adjustment.

Fitment

VehicleYearsTrims
Ford Bronco1980–1996Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport
Ford Bronco II1984–1990Base, Eddie Bauer, XL, XL Sport, XLS, XLT, XLT Plus
Ford Explorer1991–1994Eddie Bauer, Limited, XL, XLT
Ford Explorer Sport1991–1994All
Ford F-1001980–1983Base, Custom, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT Lariat
Ford F-1501980–1997Base, Custom, Eddie Bauer, Lariat, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat
Ford F-150 Lightning1993–1995All
Ford F-2501980–1997Base, Custom, Eddie Bauer, Lariat, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat
Ford F-250 HD1997XL, XLT
Ford F-3501980–1997Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat
Ford Ranger1983–1997Base, Custom, GT, S, S Plus, STX, Splash, Sport, XL, XL Sport, XLS, XLT
Jeep Cherokee (XJ)1991–2001Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport
Jeep Comanche1991–1992Base, Eliminator, Pioneer
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X
Mazda B23001994–1997Base, SE
Mazda B30001994–1996Base, SE
Mazda B40001994–1997Base, LE, SE
Mazda Navajo1991–1994DX, LX

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is a tie rod adjusting sleeve?

It is the threaded tube that joins an inner and an outer tie rod end. Turning the sleeve changes the length of the linkage, which is how toe is set during alignment.

Does the Moog ES2079S fit a Jeep Wrangler?

It fits the 1997–2006 Jeep Wrangler, along with the 1991–2001 Cherokee, 1991–1992 Comanche and 1993–1998 Grand Cherokee. Newer generations of these Jeep models are not covered, so confirm your year and model before ordering.

What is the ES2079S made of?

Moog describes alloy steel construction for durability, with a coating that resists corrosion. The sleeve is threaded inside and out to join the tie rod ends.

Does the ES2079S come with hardware?

Yes. The sleeve includes any necessary hardware, so the clamps or bolts it needs come with the sleeve. Check the included parts against your installation before starting.

Can the sleeve be used on a lifted truck?

A sleeve can change linkage length, but a lift often changes steering geometry too. Check the tie rod angle and alignment after fitting a sleeve on a lifted vehicle, and inspect the joints for extra stress.

Why are the sleeve clamps important?

Clamps hold the sleeve position under steering load. A loose clamp can let the sleeve turn and change toe, so tighten them firmly and recheck after the first trips on rough ground.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon