Overview
The Crown Automotive 52126123AC is a steering adjuster sleeve for the drag link, supplied with its clamps and hardware. It suits 2 and 4-door models and lets JK owners adjust drag link length.
Key features
- Adjusting sleeve for the drag link
- Designed for 2 and 4-door models
- Includes sleeve, 2 clamps, 2 bolts and 2 nuts
- Right Hand Drive listed
Adjusting drag link length
The drag link carries steering motion from the steering box to the front axle, so an adjuster sleeve sets how the wheels track and center. Turning the sleeve changes the length of that link, which is why small adjustments can change toe noticeably. Make small turns, recheck the centering, and keep the clamps square before tightening.
If the wheels wander or the steering wheel sits off center after a lift or regear, the drag link length may need correction. Replace the sleeve when the threads, clamps or bolts show corrosion, cracks or looseness, and check the joint ends at the same time.
- Check both ends of the drag link for play
- Look for bent or cracked clamps
- Plan an alignment after any length change
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52126123AC |
| UPC | 849603000358 |
| Application | Drag link adjuster sleeve |
| Body style | 2 and 4-door models |
| Drive configuration | Right Hand Drive |
| Included | Sleeve, 2 clamps, 2 bolts, 2 nuts |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and Unlimited versions, plus the X trim.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for JL, TJ, LJ or Gladiator applications.
Installation notes
A drag link adjuster changes steering geometry, so have toe checked with an alignment after installation.
What’s included
Sleeve, two clamps, two bolts and two nuts.
