Overview
The Omix-ADA 18056.03 is a center tie rod adjusting sleeve, the tube-type adjuster that sets tie rod length, for Jeep Cherokee XJ, Grand Cherokee ZJ, Wrangler TJ and Wrangler Unlimited LJ models. Omix-ADA identifies it as a direct fit replacement.
Offered as a stock replacement, the sleeve comes with 2 clamps and 1 tube. Years and trims for each Jeep generation are set out in the fitment section below.
Key features
- Stock replacement for the center tie rod adjusting sleeve position
- Includes 2 clamps and 1 tube
- Covers 1991–2001 Cherokee XJ, 1993–1998 Grand Cherokee ZJ, 1997–2006 Wrangler TJ and 2004–2006 Wrangler LJ
- Omix-ADA part with a limited five year manufacturers warranty
Tie rod sleeve and alignment
The center tie rod sleeve sets the length of the tie rod tube, so it is the adjuster that changes toe. On tube-type steering, the sleeve is threaded onto both ends of the tube and held with clamps, so turning it shifts the tie rod length in small steps. Keep both clamps tight and square after setting the length.
Worn sleeves usually show up as steering that feels loose, a wheel that does not return to center, or edge wear on the front tires. Inspect the sleeve threads, the clamps and the tie rod ends together, because a worn end can throw off a newly set toe. Replace the sleeve when the threads are damaged or the clamps no longer grip.
- Clean the threads before reinstalling
- Use new clamps when the old ones are bent
- Have toe set after any length change
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18056.03 |
| UPC | 804314051211 |
| Position | Center |
| Included | 2 clamps, 1 tube |
| Replacement type | Stock replacement |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1991–2001 Jeep Cherokee (XJ) in Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims, the 1993–1998 Jeep Grand Cherokee (ZJ) including 5.9 Limited, the 1997–2006 Jeep Wrangler (TJ), and the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for Wrangler JK and Grand Cherokee WJ applications.
Installation notes
Replacing the sleeve changes tie rod length and therefore toe, so set alignment after the sleeve is installed.
What’s included
The package includes the adjusting sleeve, 2 clamps and 1 tube.









