Overview
The Moog K500232 is a press-in front lower ball joint for 2011–2019 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD trucks. The joint is lubeable.
The joint has a hardened ball stud for higher loads and a forged housing with extra material in key areas. The greasable socket helps flush contaminants from the joint.
Key features
- Press-in type
- Hardened ball stud for higher loads.
- Forged housing with more material in key areas
- Greasable socket
- Designed to meet or exceed original equipment performance.
Heavy-duty steering and suspension wear
Heavy-duty trucks put more load through their front suspension than light pickups, so ball joints wear faster when towing, hauling or driving on rough roads. Wear often shows up as a slight wander, a clunk when braking, or uneven tire wear across the front axle. Checking the joints at each tire rotation catches problems before they affect steering control.
Heavy-duty front ends also rely on tie rods, drag links and steering gear, so a worn joint can make other parts wear faster. When a lower joint is replaced, inspect the related steering components and confirm that the alignment is correct before returning the truck to heavy use. Keep the boots intact to stop grit from working into the bearing.
- Wander or drift on the highway
- Clunk over bumps or when braking
- Uneven wear on front tires
- Play in the wheel when rocked
Specifications
| Brand | Moog |
|---|---|
| Part number | K500232 |
| Position | Front lower |
| Installation type | Press-in |
| Lubeable | Yes |
Vehicle fitment
The K500232 fits these trucks:
- 2011–2019 Chevrolet Silverado 2500 HD (High Country, LT, LTZ and WT)
- 2011–2019 Chevrolet Silverado 3500 HD (High Country, LT, LTZ and WT)
- 2011–2019 GMC Sierra 2500 HD (Base, Denali, SLE, SLT and WT)
- 2011–2019 GMC Sierra 3500 HD (Base, Denali, SLE, SLT and WT)
1500 models and 2020 and later HD trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the joint is press-in, the lower control arm must be removed or supported for pressing. Check the joint’s orientation against the instruction sheet before installing.
What’s included
Check the package contents against your installation before starting.










