Overview
The Mishimoto Non-Thermostatic Oil Cooler Kit, part number M/AMMOC-UHBK, is a universal 25-row engine oil cooler kit for stock and high-performance engines. It lowers oil temperatures and helps guard against oil degradation when an engine runs hot. The kit includes the cooler core, sandwich plate adapters and braided oil lines needed to plumb it in.
Oil temperature control matters on both street and race engines, because heat speeds up oil breakdown. A dedicated cooler helps keep oil in a healthier range during towing, track sessions or boosted operation. Since the kit is universal, no specific year, make or model is named, so the fitment section explains how to check compatibility before you order.
Key features
- 25-row stacked-plate oil cooler core that Mishimoto says can withstand high fluid pressures
- Designed to significantly reduce oil temperatures with minimal pressure loss
- Billet anodized aluminum sandwich plate, offered in standard or thermostatic form (this kit is non-thermostatic)
- Includes both 3/4-16 and M20-1.5 sandwich plate adapters
- Pre-assembled stainless steel braided oil lines with -10AN fittings
- Dowty seals intended for durable, leak-free connections
Oil temperature and adapter choices
Oil coolers help most when an engine is driven hard, towed with or run at high load. Heat builds in the oil between changes, so a cooler gives the oil a larger surface to shed that heat. Choose a size that suits the expected load, and keep an oil temperature gauge in view if the vehicle has one.
The sandwich plate takes the place of the filter mount, so the adapter thread needs to match before anything else is installed. Check the oil filter housing and confirm the engine’s filter arrangement. Dowty seals are commonly used in these fittings, and replacing them whenever a fitting is loosened helps prevent leaks.
- Confirm the adapter thread before cutting any hose
- Leave slack in braided lines for engine movement
- Recheck fittings after the first drive
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | M/AMMOC-UHBK |
| Type | Non-thermostatic oil cooler kit |
| Cooler core | 25-row stacked-plate |
| Sandwich plate | Billet anodized aluminum |
| Adapters | 3/4-16 and M20-1.5 |
| Oil lines | Pre-assembled stainless steel braided, -10AN fittings |
| Seals | Dowty |
| Fitment | Universal fit |
| Warranty | Mishimoto Lifetime Warranty |
Vehicle fitment
This kit is a universal fit, not tied to a specific year, make or model. Measure the space for the cooler and confirm the oil filter location accepts the adapter thread before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The sandwich plate mounts in place of the oil filter, so the adapter thread has to match your engine before anything else is fitted. Route the braided lines clear of exhaust parts, moving components and sharp edges, and mount the cooler where airflow can reach it. Check every fitting for leaks after the first warm-up.
What’s included
The kit includes the 25-row oil cooler core, the billet anodized aluminum sandwich plate, 3/4-16 and M20-1.5 sandwich plate adapters, and pre-assembled stainless steel braided oil lines with -10AN fittings and Dowty seals.















