Overview
The Dick Cepek Torque 17×8.5 wheel in black, part number D/C90000000065, is a 17-inch aluminum spoke wheel 8.5 inches wide. It has a 6 on 5.5 bolt pattern, a 110 center bore, 6 offset and 5 backspacing. The stated fitment is universal fit, so no particular truck or SUV is named.
Dick Cepek built the Torque for newer trucks and SUVs with higher offset requirements. It adds brake caliper clearance while allowing factory tire pressure monitoring sensors to be used. The finish is flat black with machined accents and a satin clear coat. Use the 6 offset and 5 backspacing figures to compare clearance against your suspension.
Key features
- 17-inch diameter and 8.5-inch width in a spoke design
- 6 on 5.5 bolt pattern with a 110 center bore
- 6 offset and 5 backspacing
- Flat black finish with machined accents
- Satin clear coat over aluminum construction
- The design can be used with factory tire pressure monitoring sensors. Confirm that your sensors and valve stems match before mounting the wheel.
Brake and suspension clearance
Clearance at the caliper depends on the wheel’s offset, its spoke design and the size of the brake assembly on the vehicle. A 6 offset moves the mounting face outward, so the caliper and the inner fender should be checked with the tire in place. Suspension travel and steering lock change the picture, so test clearance through the full range of motion.
Wheel bearings and ball joints wear over time, and added load from a wider or heavier wheel can speed that up. Check for play and noise when turning, and inspect the brake pads at each service. Keep the wheel balanced to avoid vibration that can loosen fasteners and strain the hub.
- Caliper clearance at full lock
- Inner fender clearance on suspension compression
- Wheel bearing play
- Brake pad condition at service
Specifications
| Brand | Dick Cepek |
|---|---|
| Part number | D/C90000000065 |
| Series | Torque |
| Style | Spoke |
| Finish | Black |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 110 |
| Offset | 6 |
| Backspacing | 5 |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the stated fitment, and no year, model or trim is attached. The hub bore and bolt pattern settle the match, along with brake caliper room at a 6 offset.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 6 on 5.5 pattern and 110 center bore against your hub, and confirm the wheel clears the calipers and inner fenders. Valve stems and TPMS sensors should be matched before mounting if your truck uses them.
What’s included
Only the wheel is described here, with no tires, lug nuts or TPMS sensors mentioned.
Not included: tires, lug nuts, and TPMS sensors if your vehicle uses them.









