Overview
The Mickey Thompson Classic III 16×10 is a polished aluminum truck wheel, part number M/T90000001776, with a 6 on 5.5 bolt pattern, a 106 center bore and an offset of -25. It measures 16 inches in diameter and 10 inches wide.
The Classic III is a truck wheel with a highly polished face and a high load rating. The design carries a limited lifetime warranty.
Key features
- Polished finish with matching polished hand holes
- Aluminum construction with a hole-style face
- Stated high load rating
- Backspacing of 4.5
- Carries Mickey Thompson’s limited lifetime warranty
Tire and clearance planning
A 16 by 10 wheel changes the tire you can run, so plan the tire before the wheel. Wider rims suit wider tread profiles, and the tire has to match the rim width and load needs of the truck. Tire sidewall height and overall diameter also affect speedometer reading, fender clearance and how the suspension travels over rough ground.
Offset and width together control where the wheel sits. A wide wheel can push the tire closer to the fender or the suspension at full steering lock, so check clearance with the tire mounted. Rubbing often shows up only on the trail, after the suspension compresses.
- Choose a tire sized for the rim width
- Check fender clearance at full steering lock
- Confirm the spare wheel matches the same bolt pattern
- Re-check clearance after any lift or tire change
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001776 |
| Model | Classic III |
| Wheel diameter | 16 inches |
| Wheel width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | -25 |
| Backspacing | 4.5 |
| Construction | Aluminum |
| Finish | Polished |
| Style | Hole |
Vehicle fitment
No year, make or model is named for this wheel, so fitment has to be confirmed for your truck. Beyond the Universal Fit marking, the 6 on 5.5 bolt pattern, 106 center bore and -25 offset decide whether it mounts to your hub. Confirm fit for your vehicle’s year, model and trim before ordering.
Mickey Thompson says center caps are unavailable for some older applications, among them 1997 and earlier Ford 3/4 and 1-Ton pickups and 1986 and earlier Jeep CJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before mounting, confirm the bolt pattern, center bore and offset match your hub. Plan your own lug fasteners, sized and seated to suit this wheel.
What’s included
The title describes one 16×10 wheel with a polished finish.
Not included: Lug nuts and center caps are not part of this wheel.









