Overview
The Mickey Thompson Classic III 16×8 wheel with a 6 on 5.5 bolt pattern is a polished aluminum hole-style wheel, part number M/T90000001772. It measures 16 inches across and 8 inches wide, with a 0 offset, 4.5 backspacing and a 106 center bore.
Mickey Thompson presents the Classic III as a popular truck wheel with a high load rating and a limited lifetime warranty. Carrying the Universal Fit designation, it is not matched to a single vehicle, so the bolt pattern, center bore and offset are the measurements to check against your hub.
Key features
- Polished aluminum construction with hand holes cut into the face
- Zero offset, which places the mounting face at the center of the wheel width
- 6 on 5.5 bolt pattern paired with a 106 center bore
- Stamped with the M/T mark of quality
- Limited lifetime warranty and high load rating, per the manufacturer
Zero offset and clearance
Zero offset places the mounting face at the center of the wheel width. That spreads the load evenly across the inner and outer sides of the wheel and keeps the tire centered between the fenders. Clearance on both sides still needs checking, because a wheel that is centered can still rub a caliper, a spring or a control arm when the suspension travels.
Backspacing works with offset to set the inner clearance. When the inner barrel has less room, the brake caliper and suspension parts get closer. A quick check is to turn the steering fully and look for contact, then recheck after any change to the tire or suspension height.
- Check inner and outer clearance with the wheel mounted
- Turn the steering fully to find contact points
- Recheck clearance after a suspension or tire change
- Balance the wheel after mounting
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001772 |
| Style | Hole |
| Finish | Polished |
| Construction | Aluminum |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 0 |
| Backspacing | 4.5 |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle list accompanies this wheel, and it is marked Universal Fit. Check the 6 on 5.5 bolt pattern and 106 center bore against your hub, then review offset and backspacing against your suspension and brake clearance.
Some applications cannot take a center cap. Named examples include Ford 3/4 and 1-Ton pickups from 1997 and earlier, Dodge/Ram 3/4 and 1-Ton pickups from 2002 and earlier, Toyota Land Cruisers from 1997 and earlier, and Jeep CJ models from 1986 and earlier. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With a zero offset, the mounting face sits at the center of the wheel width, so measure brake caliper and tire clearance on both sides with the wheel mounted before the vehicle is driven.
What’s included
The package is the wheel alone, without caps or fasteners.
Not included: Fasteners and caps are not part of this wheel.









