Overview
The Mickey Thompson Sidebiter II 17×9 wheel, part number M/T90000019402, is a 17-inch aluminum split spoke wheel that measures 9 inches wide and uses a 6 on 5.5 bolt pattern. It is black with a satin finish. The design is styled after the SideBiter tread-on-the-sidewall tire concept, an innovation known in off-road history.
This heavy duty wheel has an easy-to-clean finish and styling suited to Jeeps, trucks and 4x4s. It carries a Universal Fit designation, so confirm the bolt pattern, center bore, offset and backspacing against your own vehicle before mounting.
Key features
- 17 by 9 inch aluminum wheel in a split spoke style
- Satin black finish
- Easy to clean finish, per the brand’s description
- 6 on 5.5 bolt pattern with a 106 center bore
- Offset 0 and backspacing 5
- Styled after the SideBiters tread-on-the-sidewall tire design
Choosing the right setup
Wheel width and diameter set the room available for a tire, and the tire’s overall diameter and load rating should be matched to the wheel before buying. A wider wheel can move the tread closer to fender edges and suspension parts at full lock, so a tire shop should confirm mounting, balance and clearance. Aluminum wheels are often chosen for lighter weight than steel, which can help suspension follow rough ground more readily.
After a hard impact, look at the bead seat and spokes for cracks or bends, and check the mounting face for corrosion. Recheck lug torque after the first few drives with new wheels. Keep valve stems and bead areas clean so the tire seals reliably against the rim over time.
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000019402 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Style | Split Spoke |
| Construction | Aluminum |
| Finish | Satin black |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 0 |
| Backspacing | 5 |
| Fitment | Universal Fit |
Vehicle fitment
Fitment is shown as Universal Fit, so this wheel is not tied to a single year, make or model. Check the 6 on 5.5 bolt pattern, 106 center bore, zero offset and 5 backspacing against your hub and tire clearance before mounting.
Center caps ARE NOT available for certain applications, including 1997 and earlier Ford 3/4 and 1-Ton pickups, 2002 and earlier Dodge/Ram 3/4 and 1-Ton pickups, 1997 and earlier Toyota Land Cruiser models and 1986 and earlier Jeep CJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tire diameter, width and fender clearance depend on the tire chosen for a 17-inch, 9-inch-wide wheel, so have a tire shop confirm them before mounting.
What’s included
Only a single wheel is described. Not included: no tire is named with it, and the center cap restriction above applies to the listed older applications.









