Overview
The Mickey Thompson Classic III 16×10 wheel with an 8 on 6.5 bolt pattern is a polished aluminum hole-style truck wheel, sold under part number M/T90000001777. It is 16 inches in diameter and 10 inches wide, with a -25 offset, 4.5 backspacing and a 125 center bore.
Built for high loads, this Classic III wheel carries an M/T stamp on its face and a limited lifetime warranty. Because it is marked Universal Fit, bolt pattern, center bore, width and offset decide which hubs it suits.
Key features
- Polished aluminum face with polished hand holes for a distinctive look
- 16-inch diameter paired with a 10-inch width
- 8 on 6.5 bolt pattern and 125 center bore
- -25 offset and 4.5 backspacing
- M/T stamp of quality on the wheel
- High load rating and limited lifetime warranty.
Offset and brake clearance
Offset decides where the mounting face sits relative to the wheel width, and that changes how the wheel clears the brake caliper, the fender and the steering components. Backspacing shows how much room the inner barrel has behind the mounting face. Both figures should be checked together, because a wheel that clears the fender can still hit a caliper or a control arm.
Brake clearance is often the tightest point. Calipers vary in size, so the inner barrel needs to clear the caliper body with room to spare, and the fit should be checked with the wheel mounted and the steering turned fully. Spacers and wheel changes can shift the stance, so re-check after any change to the setup.
- Measure backspacing against the caliper body
- Check inner and outer clearance with the wheel mounted
- Re-check clearance after any suspension change
- Use spacers only when the hub and bolt pattern allow
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001777 |
| Style | Hole |
| Finish | Polished |
| Construction | Aluminum |
| Wheel diameter | 16 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -25 |
| Backspacing | 4.5 |
| Fitment | Universal Fit |
Vehicle fitment
This wheel is marked Universal Fit, so it is not sold for a specific year, make or model. Match the 8 on 6.5 bolt pattern, 125 center bore and -25 offset to your hub and brake clearance before mounting.
Center caps are not offered for some older applications, including 1997 and earlier Ford 3/4 and 1-Ton pickups, 2002 and earlier Dodge/Ram 3/4 and 1-Ton pickups, 1997 and earlier Toyota Land Cruiser models, and 1986 and earlier Jeep CJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A -25 offset moves the mounting face outward relative to a zero-offset wheel of the same width, so check inner and outer clearance against suspension and fenders. Confirm the 4.5 backspacing clears your brake caliper before the wheel is mounted.
What’s included
The package is the wheel alone, with no caps or mounting hardware.
Not included: Lug hardware is not part of this wheel.









