Overview
The Mickey Thompson Classic III 17×9 wheel in polished finish, part number M/T90000001786, is an aluminum truck wheel measuring 17 inches across and 9 inches wide. Its bolt pattern is 8 on 170, with a center bore of 125, an offset of 0 and a backspacing of 5.
The Classic III has a highly polished face with matching polished hand holes, and it carries a high load rating. The M/T stamp of quality is part of the design, and a limited lifetime warranty applies to the wheel.
Key features
- Highly polished finish with matching polished hand holes
- High load rating for popular truck use
- Aluminum construction, 17 by 9 inches
- 8 on 170 bolt pattern with a 125 center bore
- Limited lifetime warranty backed by the brand
Polished wheel care basics
Polished aluminum faces show water spots, road grime and brake dust more readily than painted wheels. Wash them with mild soap and a soft brush, then rinse and dry them so mineral deposits do not etch the surface. Avoid acid-based cleaners and steel wool, which can leave hazy marks on a mirror finish.
Because the wheel is polished throughout, the hand holes and face need the same routine as the rest of the wheel. A protective wax or a polish made for aluminum can slow tarnish between washes. Inspect the lip and spokes regularly for nicks, since a small curb strike shows clearly on a bright finish and may need professional attention.
- Rinse off road salt soon after winter drives
- Use a soft mitt and mild soap
- Recheck lug torque after the first trail runs
Specifications
| Brand | Mickey Thompson |
|---|---|
| Part number | M/T90000001786 |
| Style | Classic III |
| Finish | Polished |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 125 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | High |
| Warranty | Limited lifetime |
Vehicle fitment
This wheel is marked Universal Fit, so no particular year, make, model or trim is named for it. Measure your hub against the 8 on 170 pattern and 125 center bore, then check the 0 offset and 5 backspacing against your clearance.
Several older trucks cannot take a center cap with this wheel. The affected groups are 1997 and earlier Ford 3/4 and 1-Ton pickups, 2002 and earlier Dodge/Ram 3/4 and 1-Ton pickups, 1997 and earlier Toyota Land Cruisers and 1986 and earlier Jeep CJs. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Lug nuts, center caps and valve stems may need to be sourced separately, so check the package contents against your installation before starting.
Not included: A tire is not part of this package, so buy one separately.









