Overview
The Method Race Wheels MR705 Bead Grip is an 18×9 aluminum split-spoke wheel, part number MRWMR70589080518, with an 8 on 6.5 bolt pattern and a matte black finish. It is built for off-road use, where lower tire pressures can widen the contact patch on loose ground and soften the ride. Method says its patented Bead Grip design lets owners run those low pressures with less risk of the tire coming off the bead.
Bead Grip technology lets tires run at pressures that would otherwise call for beadlock wheels, without the tire coming off the bead. The wheel is solid A356 aluminum with T6 heat treatment, and the Bead Grip design engages the tire bead for extra grip at low pressures.
Key features
- Patented Bead Grip design engages the tire bead for extra grip at low tire pressures
- Solid A356 aluminum with T6 heat treatment
- Split 5-spoke design with 10 windows and a debossed METHOD logo on the face
- Aggressive safety hump on the bead seats further helps prevent debeading
- Reinforced inner lip taken from the MRW race wheel for added strength
- Snap-in center cap with embossed METHOD Bead Grip logo
- Push-through center cap with embossed METHOD Bead Grip logo for 8 lug applications
- Hub centric fitments for common applications
- Load ratings of 2650 lbs. to 3640 lbs.
Pressure limits and trail driving
Bead Grip design lets tires run lower pressures, but it does not remove the risks of low pressure. Lower pressure increases sidewall flex and pinch risk, and it makes traction more sensitive to terrain. Drop pressure gradually and match it to the trail rather than setting one number for every trip.
Pressure checks should be made with a gauge when the tire is cold. Carry a gauge and a compact air source, and rebuild pressure before highway driving. Watch the bead on each side after a hard hit, since a shift can show up as a sudden change in handling.
Cleaning and inspection extend the life of the wheel. Rinse mud and grit from the bead seats and the window openings, and look for cracked spokes or bent lips after rough runs. Address a bent lip before further driving.
- Lower pressure gradually
- Check tire pressure cold with a gauge
- Inspect bead seats after hard hits
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70589080518 |
| Series | MR705 Bead Grip |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Offset | 18 |
| Center bore | 131 |
| Backspacing | 5.75 |
| Bolt pattern | 8 on 6.5 |
| Style | Split spoke |
| Finish | Matte black |
| Construction | Solid A356 aluminum, T6 heat treated |
| Load rating | 2650 lbs. to 3640 lbs. |
Vehicle fitment
Universal fit is the only fitment designation. Bolt pattern, center bore and offset decide whether the wheel clears a specific hub, so measure before ordering. Hub centric fits cover common applications.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bead Grip wheels are meant for low tire pressures, so check the tire’s pressure limits before running them low. Low pressure on rough ground can still let a tire come off, so drive carefully after changing pressure.
What’s included
Check the package contents against your installation before starting, including whether you need a center cap.
Not included: tires, since this is a wheel only.












