Overview
The Method Race Wheels MR705 17×8.5 in Matte Black is a split-spoke aluminum wheel for a 6 on 5.5 bolt pattern. It carries part number MRWMR70578560500, has offset 0, center bore 106 and backspacing 4.75, and belongs to the MR705 Bead Grip series that Method designs for lower-pressure off-road running.
The Bead Grip design lets the tire run at lower pressure than a standard wheel allows, without the bead slipping off the rim. The contact patch grows on loose ground, which gives a softer ride. Bolt pattern, hub bore and backspacing determine whether this wheel fits your vehicle.
Key features
- Patented Bead Grip technology holds the tire bead at low pressures.
- T6 heat-treated solid A356 aluminum body.
- Split 5-spoke layout with 10 windowed openings and a debossed METHOD face logo.
- A pronounced safety hump on each bead seat works against de-beading.
- Reinforced inner lip, described by the brand as drawn from its MRW race wheel.
- Center cap that snaps in, marked with an embossed METHOD Bead Grip logo.
- A push-through cap version is made for 8-lug applications.
- Strength ratings listed at 2650 lbs. to 3640 lbs.
Using a hub-centric ring
A hub-centric ring fills the gap between a wheel’s center bore and a hub that is larger than the bore. It centers the wheel on the hub, so the lug studs carry only the clamping load and do not have to locate the wheel. Without that centering, a wheel can vibrate at speed and put extra stress on the studs.
Rings are sized to the hub, so measure the hub bore with calipers and compare it with the wheel bore before buying. Keep both faces clean so the wheel seats flat against the hub, and recheck lug torque after the first few drives.
- Measure the hub bore before ordering
- Match the ring to the hub, not the lug pattern
- Clean the hub face before fitting
- Recheck lug torque after the first few drives
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70578560500 |
| Series | MR705 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 0 |
| Center bore | 106 |
| Backspacing | 4.75 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Solid A356 aluminum with T6 heat treatment |
| Load rating | 2650 lbs. to 3640 lbs. |
Vehicle fitment
No vehicle is named for this wheel, and it is marked Universal Fit. Fitment depends on the 6 on 5.5 bolt pattern, 0 offset, 4.75 backspacing and 106 center bore matching your hub and brake setup. If the bore does not match your hub, a hub-centric ring may be needed, so measure before ordering.
Verify year, model and trim against your vehicle before buying.
Installation notes
Have the tire mounted by a shop that regularly works with Bead Grip rims, since the bead seat design is what allows lower pressure running. After mounting, check clearance to calipers and suspension parts, and recheck after the first hard off-road run.
What’s included
A snap-in center cap with an embossed METHOD Bead Grip logo is included, with no other hardware.
Not included: Tires, lug nuts and valve stems are not included, so obtain them before installing the wheel.












