Overview
The Method Race Wheels 701 Trail Series 17×8.5 wheel in Matte Black, part number MRWMR70178550500, is an 8.5-inch wide, 17-inch diameter aluminum trail wheel with a 5 on 5 bolt pattern, 72 center bore, 0 offset and 4.75 backspacing.
The wheel is built from one-piece cast 356 aluminum and heat treated to T6. The MR701 Bead Grip design adds grip between the tire bead and the bead seat at reduced air pressures, which helps on uneven trails. It is a universal fit wheel, so it is not tied to a specific make, model or year. The windowed Matte Black wheel can be compared against the specifications below.
Key features
- One-piece cast 356 aluminum with T6 heat treatment
- Bead Grip technology that engages the tire bead seat at lower tire pressures
- Reinforced inner lip taken from Method’s race wheel design
- Aggressive safety hump on the inner and outer bead seat that helps prevent de-beading
- Method reports Finite Element Analysis and field testing during development
- No weight figure is available, so compare weights directly if weight matters to your build.
- Windowed style with Matte Black finish
Care and inspection
Trail wheels take repeated impacts from rocks, roots and ruts. Inspect the wheel after each outing for bent lips, cracks near the spokes or windows, and damage around the bead seat. Small scrapes on a matte finish can be cleaned with mild soap and water, but avoid harsh chemicals that can dull the coating over time.
Wheel and hub fasteners should be rechecked after the first few trail runs, because new tires and wheels can settle. Look for loose lug nuts, uneven tire wear, or a vibration that appears at a steady speed. Any of these signs means the wheel should be removed and checked before further use.
- Inspect for bent lips and cracks after each outing
- Clean with mild soap and water
- Recheck lug nuts after the first trail runs
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70178550500 |
| Series | 701 Trail Series, MR701 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | 0 |
| Backspacing | 4.75 |
| Construction | One-piece cast 356 aluminum, T6 heat treated |
| Style | Windowed |
| Finish | Matte Black |
Vehicle fitment
It is a universal fit wheel, not built for one make, model or year. Check the 5 on 5 bolt pattern, 72 center bore, 0 offset and 4.75 backspacing against your hub, and confirm brake and suspension clearance before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Zero offset with 4.75 backspacing places the mounting face and rear lip in a set position, so measure clearance with the tire you plan to run before the wheel sees trail use.
What’s included
Whether lug nuts, center caps and valve stems are included is unknown. Check the package contents before starting.
Not included: Tires are sold separately and must be sourced to complete the wheel and tire assembly.















