Overview
The Method Race Wheels 301 The Standard 17×8.5 is a 17-inch aluminum spoke wheel in matte black, part number MRWMR30178550500, with a 5 on 5 bolt pattern and a 94 center bore. It is part of the MR301 The Standard series from Method Race Wheels.
Method built the MR301 design for off-road racing and engineered it for that purpose. Finite Element Analysis and field testing guided development, with a focus on less weight and more strength. Offset 0 and backspacing 4.75 set its position in the wheel opening.
Key features
- 17-inch diameter and 8.5-inch width
- Aluminum spoke construction
- 5 on 5 bolt pattern with a 94 center bore
- Offset 0 and backspacing 4.75
- Matte black finish
- Developed with Finite Element Analysis and field testing, per the brand
Matching hub and clearance
A wheel’s bolt pattern and center bore must match the hub before anything else. A hub-centric fit lets the hub carry the load and keeps the wheel centered, while a mismatched bore can cause vibration that is hard to trace later. Measure the hub and compare it with the wheel before buying.
Offset and backspacing decide how far the wheel sits in the fender and how close the inner lip comes to brake calipers and suspension parts. Zero offset places the mounting face at the wheel’s centerline, so the wheel sits closer to the middle of the fender than a positive offset would. Tire width and sidewall height change clearance too, so check the full setup together.
Lug seat style matters as much as thread size. Use hardware matched to the wheel’s seat, then torque in a star pattern and recheck after the first short drive.
- Compare hub bore with center bore
- Check brake caliper clearance with a full steering sweep
- Match lug seat style to the wheel
- Recheck torque after the first drive
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30178550500 |
| Series | MR301 The Standard |
| Diameter | 17 inches |
| Width | 8.5 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 94 |
| Offset | 0 |
| Backspacing | 4.75 |
| Construction | Aluminum |
| Style | Spoke |
| Finish | Matte black |
| Fitment field | Universal Fit, no vehicles named |
Vehicle fitment
No vehicle is named for this wheel; only the Universal Fit entry appears. Confirm that the 5 on 5 bolt pattern and 94 center bore match your hub before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the wheel and check clearance to the brake caliper and suspension through a full steering sweep before driving. Wheel clearance problems can cause rubbing or damage, so resolve any contact before using the vehicle.
What’s included
This item covers one wheel.
Not included: Confirm which tires, lug nuts and center caps you need before mounting.











