Overview
The Method Race Wheels 310 Con 6 is a 17×8.5 spoke-style aluminum wheel in Matte Black, part number MRWMR31078562500. It uses a 6 on 120 bolt pattern and belongs to Method’s MR310 Con6 series. The design is a clean, simple six-spoke layout.
The hub covers are bolt-on, the zinc plated bolts around the outer lip are removable, and the word Method is machined into one spoke. The wheel suits stock trucks, Jeeps and SUVs as well as off-road vehicles. Each design is engineered for its intended use with finite element analysis and field testing, aiming for lower weight and higher strength.
A 17×8.5 wheel on a 6 on 120 pattern with 0 offset places the mounting face at the wheel centerline, which affects how the wheel sits relative to the hub and suspension clearance. Compare the offset, backspacing and width with your planned setup before you choose this finish.
Key features
- 6-spoke design in Matte Black.
- Bolt-on hub covers.
- Removable zinc plated bolts around the outer lip.
- Method machined into one spoke.
- 17-inch diameter and 8.5-inch width, aluminum construction.
- 6 on 120 bolt pattern with a center bore of 67.
- Offset of 0 and backspacing of 4.75.
Spoke wheels and brake clearance
Spoke designs leave more of the brake area visible, which makes it easier to check caliper clearance and rotor condition. Offset of 0 places the mounting face at the centerline, so the wheel sits farther in than a positive-offset wheel would. Backspacing near 4.75 leaves less room behind the face, so check the inner barrel against suspension parts.
Spoke pockets collect mud and grit, so clean them after off-road trips and look for cracks at the spoke bases. Hub covers should sit flush and be checked for looseness after the first drives. Lug torque also deserves a recheck early on, because loose fasteners can work out on rough trails. Keep the inner barrel free of debris that could hide a crack.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31078562500 |
| Series | MR310 Con6 |
| Style | Spoke (6-spoke) |
| Construction | Aluminum |
| Finish | Matte Black |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 120 |
| Center bore | 67 |
| Offset | 0 |
| Backspacing | 4.75 |
Offset of 0 places the mounting face level with the wheel centerline. Backspacing measures from the mounting face to the inner edge of the wheel, which helps judge clearance behind the wheel.
Vehicle fitment
Fitment is limited to general terms: stock trucks, Jeeps and SUVs, with no model years or chassis codes named. Universal Fit does not establish a match, so compare the bolt pattern, center bore, offset and width with your vehicle first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the hub diameter before mounting, since the 67 center bore must clear it. A hub wider than 67 will not accept the wheel. Confirm the bolt-on hub covers are fitted correctly once the wheel is on the vehicle.
What’s included
The wheel’s features include bolt-on hub covers and removable lip bolts. Confirm whether lug nuts, a tire or center caps are included before ordering.











