Overview
The Method Race Wheels MR605 NV in a 20×10 size, matte black finish, 6×135 bolt pattern and part number MRWMR60521016524N is a 600 Series aluminum wheel. It is 20 inches across and 10 inches wide, and it uses the windowed style with a Street-Loc lip.
Method frames the MR605 NV as a more aggressive take on the MR305 NV, offering 20×10 and 20×12 sizes. The brand aims it at lifted trucks, Jeeps and SUVs. The 2650 lb rating covers 5 and 6 lug applications, and the wheel is labeled universal fit, so the 6-on-135 pattern and center bore still decide whether it mounts.
Key features
- Matte black finish on a windowed aluminum face.
- Street-Loc lip with removable stainless steel bolts around the lip.
- A 3-inch lip on the 20×10 size.
- Snap-in cap with a raised Method logo for 5 and 6 lug applications, set in a bolt-on aluminum center ring.
- Offset -24 and backspacing 4.55 give a deep-dish face.
- Load rating of 2650 lbs for 5 and 6 lug use.
Mounting and balancing the tire
A new tire on a wide wheel needs a proper bead seat, which a shop achieves with a bead seater and steady air pressure. Once seated, balance the assembly, because a wheel at this diameter can show vibration from small weight differences. Use a torque wrench on the lug nuts after the first few drives to confirm they have held.
Tire sidewall height affects both ride and clearance. Taller sidewalls cushion impacts, while low-profile tires leave less room for the wheel to flex. Confirm the tire load rating meets the vehicle’s needs and that the sidewall clears the lip. Check tire pressure before every trip, since off-road pressures change how the tire sits on the bead.
- Mount and balance with a shop that has the right equipment
- Check the bead seat after airing down
- Torque lug nuts in a star pattern
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR60521016524N |
| Series | MR605 NV (600 Series) |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Lip | 3 inches (20×10) |
| Offset | -24 |
| Backspacing | 4.55 |
| Center bore | 87 |
| Bolt pattern | 6 on 135 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | Aluminum |
| Load rating | 2650 lbs (5 and 6 lug applications) |
| Fitment | Universal Fit (as labeled) |
Vehicle fitment
Universal fit means no truck, Jeep or SUV model or year is tied to this wheel. Start with the 6 on 135 pattern and 87 center bore, then check the -24 offset and 4.55 backspacing against your fender and suspension clearance.
A 6-on-135 bolt circle will not line up with hubs drilled for other counts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The snap-in cap on 5 and 6 lug versions differs from the bolt-on cap used on 8 lug versions, so check the cap style against your application. Verify the 87 center bore on your hub, and confirm fender clearance for the -24 offset on lifted rigs.
What’s included
The product covers the wheel, its aluminum center ring and snap-in cap, and the removable stainless steel lip bolts.
Not included: Tires and lug nuts.










