Overview
The Method Race Wheels MR705 in 18×9 with an 8 on 180 bolt pattern is finished in Matte Black and carries part number MRWMR70589088518. Its listed offset is 18, backspacing 5.75 and center bore 131. Method markets this as part of the MR705 Bead Grip series for off-road drivers who lower tire pressure.
Confirm the exact width before ordering, since the wheel is 8.5 inches wide. The Bead Grip design holds the tire bead at low pressure, and the wheel includes a reinforced inner lip, a safety hump on the bead seats and a Universal Fit designation.
Key features
- Bead Grip design that Method says holds the bead at low pressures for extra grip.
- A356 aluminum, solid construction with T6 heat treatment.
- Split 5-spoke layout with 10 windows and a debossed METHOD logo.
- Method built an aggressive safety hump into each bead seat against de-beading.
- Reinforced inner lip built on the MRW race wheel design.
- Cap that snaps in and is embossed with the METHOD Bead Grip logo.
- Push-through cap meant for 8-lug applications.
- Rated 2650 lbs. to 3640 lbs.
Checking width before mounting
Width determines how far a tire can sit across the rim and how the tire profile fills the wheel well. Before buying tires or spacers, confirm the wheel’s width, since a width mismatch changes the tire range that will seat properly on the bead.
An 8 on 180 bolt pattern and 131 center bore are demanding measurements. Compare them with the hub on the vehicle, and use hub centric rings where the bore is larger than the hub. Inspect the wheel face and spokes for clearance once mounted.
Bead seat care is the same as for any Bead Grip wheel: keep seats clean, keep debris off the seating surface, and have the tire mounted by a shop familiar with the design. After a hard impact, check the wheel for cracks or bending before driving farther.
- Confirm width before buying tires
- Compare bolt pattern and bore with the hub
- Inspect after hard impacts
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70589088518 |
| Series | MR705 Bead Grip |
| Wheel diameter | 18 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 8 on 180 |
| Offset | 18 |
| Center bore | 131 |
| Backspacing | 5.75 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Solid A356 aluminum with T6 heat treatment |
| Load rating | 2650 lbs. to 3640 lbs. |
Vehicle fitment
Check the 8 on 180 bolt pattern and 131 center bore against your hub, along with offset 18 and backspacing 5.75, before ordering. Confirm the width too.
No vehicle, model year or trim is named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tire seating on Bead Grip wheels is a job for a shop that knows the design. After mounting, check caliper and suspension clearance, and confirm the final width with the manufacturer if your build depends on it.
What’s included
A snap-in cap and a push-through cap are the center cap options. Tires, lug nuts and valve stems need to be sourced separately.












