Overview
Part number MRWMR70589060518 is the Method Race Wheels MR705 in 18×9, finished in Matte Black, with a 6 on 5.5 bolt pattern. This version has offset 18, center bore 106 and backspacing 5.75. It sits in the MR705 Bead Grip series, which Method builds for off-road work where lower tire pressures are used.
Bead Grip construction lowers tire pressure without losing the bead, which enlarges the tire’s footprint on loose surfaces. Because the wheel is Universal Fit, offset 18 and backspacing 5.75 are the key figures to match against your hub and brake clearance.
Key features
- Bead Grip tire retention that Method says engages the bead for grip at low pressure.
- Solid A356 aluminum construction with T6 heat treatment.
- Split 5-spoke face with 10 windows and METHOD lettering debossed on the face.
- Method built an aggressive safety hump into each bead seat against de-beading.
- Reinforced inner lip drawn from the MRW race wheel design.
- Center cap that snaps in, with METHOD Bead Grip lettering pressed into it.
- Push-through version of the cap for 8-lug applications.
- Load ratings of 2650 lbs. through 3640 lbs.
Hub-centric rings and spacers
A hub-centric ring fills the gap between the wheel bore and the hub hub-face, so the wheel centers on the hub instead of the lug nuts. This keeps vibration down and reduces stress on the studs. Choose a ring that matches your hub bore and wheel bore exactly, and avoid stacking rings or using loose adapters.
Spacers are a different tool. They move the wheel outward, which changes clearance to brakes and suspension and can alter load on the bearings. Before adding any spacer to a wheel with this offset, measure the clearance and confirm the lug studs still have enough thread engagement.
After any hub-centric or spacer change, retorque the lug nuts after the first drive and recheck them again after the first few trips.
- Measure hub bore before buying rings
- Avoid stacking spacers and rings
- Retorque lug nuts after the first drive
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70589060518 |
| Series | MR705 Bead Grip |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 18 |
| Center bore | 106 |
| Backspacing | 5.75 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Solid A356 aluminum with T6 heat treatment |
| Load rating | 2650 lbs. to 3640 lbs. |
Vehicle fitment
The wheel is Universal Fit with hub-centric fitments for common applications. Measure your hub and compare the 6 on 5.5 bolt pattern, 106 bore, offset 18 and backspacing 5.75 before ordering. A ring may be needed if the bore does not match.
Match the year, model and trim to your vehicle before buying.
Installation notes
Mount the tire through a shop equipped for Bead Grip rims. With offset 18 and backspacing 5.75, verify brake caliper and suspension clearance once the wheel is on the vehicle, and recheck after rough trail use.
What’s included
A snap-in center cap is the included accessory. Plan to obtain tires, lug nuts and valve stems yourself.












