Overview
The Method Race Wheels MR315 18×9 in Machined Clear Coat, part number MRWMR31589058318, is an 18-inch aluminum wheel with a 5 on 150 bolt pattern, a 9-inch width, a center bore of 111, an offset of 18 and a backspacing of 5.75. It is a windowed MR315 wheel and is not matched to a particular vehicle.
The MR315 line is made for off-road racing, and each design is engineered for its use. Finite element analysis and field testing were used during development. The machined face is the main visual feature of this version, and offset 18 with backspacing 5.75 determines where the wheel sits in the fender, so compare both with your current wheels.
Key features
- Machined clear coat finish on aluminum construction
- Windowed MR315 style
- 5 on 150 bolt pattern
- 18-inch diameter and 9-inch width
- Center bore 111, offset 18 and backspacing 5.75
Keeping the clear coat intact
A clear coat over machined aluminum protects the cut texture from oxidation and road salt. Once the coating is chipped, the bare metal can darken quickly, so small chips are worth sealing before they spread under the surface.
Wash the wheel with a pH-balanced cleaner and a soft mitt, and avoid abrasive pads that wear through the top layer. Apply a sealant or wax every few washes to keep water beading and brake dust from bonding to the surface.
Off-road mud and rock strikes are the usual cause of clear coat damage on a windowed design. Inspect the lip and the spoke edges after each trip, and recheck lug torque after the first drive since fastener seating can change once the wheel is in service.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31589058318 |
| Series | MR315 |
| Style | Windowed |
| Finish | Machined clear coat |
| Construction | Aluminum |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 111 |
| Offset | 18 |
| Backspacing | 5.75 |
Vehicle fitment
This wheel is not matched to a particular vehicle, so check its bolt pattern and bore before deciding.
Check the 5 on 150 bolt pattern, center bore 111, offset 18 and backspacing 5.75 against your vehicle’s wheel specifications before deciding.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A hub smaller than the 111 center bore needs hub-centric rings to center the wheel. Tighten fasteners to the specification your vehicle maker publishes, and recheck them after the first drive.
What’s included
Lug nuts and center caps are not addressed here.
Not included: Tires.









