Select your vehicle

Method Race Wheels 306 Mesh, 18x9 with 8 on 170 Bolt Pattern – Matte Black – MR30689087518

Method Race Wheels

Shop Method Race Wheels 18x9 on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Method Race Wheels 306 Mesh 18×9 wheel, part MRWMR30689087518
  • 8 on 170 bolt pattern, 131 center bore, offset 18, backspacing 5.75
  • Matte Black aluminum with a mesh face and 13mm replaceable lip bolts
  • All-new black center cap comes with the wheel
  • No vehicle year or model is attached to this wheel.

Description

Overview

The Method Race Wheels 306 Mesh 18×9 in Matte Black, part number MRWMR30689087518, is an aluminum wheel with an 8 on 170 bolt pattern and a 131 center bore. Method’s MR306 Mesh gives the wheel the understated look of the original Standard, with a mesh face suited to trucks, Jeeps and SUVs.

The offset is 18 and the backspacing is 5.75. The MR306 series comes in 16-20 inch sizes, and the lip uses decorative polished bolts that can each be replaced on their own, so a single damaged bolt does not force a new wheel.

Key features

  • Mesh-style face in Matte Black aluminum
  • 8 on 170 bolt pattern and 131 center bore
  • Offset 18 with a 5.75 backspacing
  • 13mm decorative polished lip bolts, fully replaceable
  • Black center cap, with the Method name machined into a spoke
  • Available in 16-20 inch sizes in the MR306 range

Before you mount

Mounting a wheel with a large center bore goes best when the hub is checked first. If the hub is smaller than the bore, the wheel will not seat, and a larger hub calls for hub-centric rings. Dirt, rust or old paint on the hub face can throw off how the wheel sits, so clean the mating surfaces before installing.

Lug nuts should be tightened in a star pattern, and torque should be checked again after the first few drives on new tires. Keep the center cap somewhere safe while the wheel is off the vehicle, and look over the face and lip for scrapes after a trail run, since small chips can hide until the wheel is cleaned.

  • Check the hub bore before fitting
  • Clean the hub face and wheel seat
  • Torque lug nuts in a star pattern
  • Recheck torque after the first drives

Specifications

Brand Method Race Wheels
Part number MRWMR30689087518
Series MR306 Mesh
Style Mesh
Finish Matte Black
Construction Aluminum
Wheel diameter 18 inches
Wheel width 9 inches
Bolt pattern 8 on 170
Center bore 131
Offset 18
Backspacing 5.75
Lip bolts 13mm decorative polished, fully replaceable
Size range in series 16-20 inch

Vehicle fitment

No vehicle year, make or model is attached to this wheel. It is sold for general fit on most trucks, Jeeps and SUVs, so compare the bolt pattern, center bore, offset and backspacing with your vehicle’s specifications.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The 131 center bore should match your hub or be bridged with hub-centric rings. The lip bolts take a 13mm socket, so have one ready if a bolt is replaced.

What’s included

The wheel and the black center cap that comes with it.

Not included: Tires and lug hardware are not included with the wheel.

SKU: MRWMR30689087518 Categories: ,

Questions & Answers

What are the offset and backspacing of Method MR306 Mesh MRWMR30689087518?

Offset is 18 and backspacing is 5.75. The wheel is 18 inches in diameter and 9 inches wide, with an 8 on 170 bolt pattern and a 131 center bore.

Are the lip bolts replaceable on this wheel?

Yes. The lip bolts are fully replaceable. They are 13mm decorative polished bolts set around the lip, so a single bolt can be swapped without replacing the whole wheel.

Does this Method wheel fit my vehicle?

No vehicle year, make or model is attached to this part number. Method's general note covers most trucks, Jeeps and SUVs, so check the measurements against your vehicle's specifications before choosing this wheel.

How often should the lip bolts be inspected?

Check the lip bolts whenever the tires come off and after hard off-road use. Look for loose fit, stripped heads or corrosion, and replace a damaged bolt rather than tightening it. Keeping a 13mm socket in the toolbox makes that check quick.

Should a wheel like this be re-balanced after a tire change?

Yes. Any new tire should be balanced on the wheel before it is driven. Balancing corrects weight differences in the tire and keeps vibration down at speed, which matters more on larger wheels. Ask the shop to check balance after the first highway run.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Method Race Wheels 18x9 on Amazon