Overview
The Method Race Wheels 306 Mesh 18×9 in Matte Black, part number MRWMR30689087512N, is an aluminum wheel with an 8 on 170 bolt pattern and a 131 center bore. It is part of Method’s MR306 Mesh series, which takes its cues from the original Standard with understated, timeless lines and a mesh face.
This version carries a negative offset of -12 and a backspacing of 4.5. A negative offset moves the mounting face outboard compared with a positive offset, so clearance inside and outside the wheel well should be checked once the wheel is fitted.
Key features
- Matte Black mesh face on an 18×9 aluminum wheel
- 8 on 170 bolt pattern with a 131 center bore
- Offset -12 and backspacing 4.5
- Lip bolts are 13mm, decorative, polished and replaceable
- Black center cap, with the Method name on one spoke
- The series covers 16-20 inch sizes.
Balancing and runout
A wheel with a negative offset and a wide stud pattern can show runout that is hard to spot by eye. After mounting, have the tire and wheel assembly balanced, since an unbalanced assembly can cause steering wheel shimmy and uneven tire wear. Ask for a runout check on the hub face if the wheel wobbles at speed, because a bent or dirty mounting surface can cause it.
Balance weights can affect the wheel’s finish, so choose clip-on weights where possible and avoid stick-on weights on matte surfaces that might leave residue. Recheck balance after tire rotations or after any repair. Keep the wheel and tire balanced to reduce vibration in the steering and suspension.
- Tire and wheel balanced after mounting
- Hub face checked for runout if wobble appears
- Clip-on weights used where possible
- Balance rechecked after rotation or repair
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30689087512N |
| Series | MR306 Mesh |
| Style | Mesh |
| Finish | Matte Black |
| Construction | Aluminum |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 131 |
| Offset | -12 |
| Backspacing | 4.5 |
| Lip bolts | 13mm decorative polished, fully replaceable |
| Size range in series | 16-20 inch |
Vehicle fitment
No year, make or model is named for this wheel. The 8 on 170 pattern is the first figure to check against your hub, and the -12 offset changes how the wheel sits, so compare both with your vehicle before choosing it. The MR306 range suits most trucks, Jeeps and SUVs as a general application.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 131 center bore against your hub. A hub larger than the bore needs hub-centric rings, and a smaller hub will not take the wheel. Because the offset is negative, check tire clearance at full steering lock and through suspension travel after mounting.
What’s included
The wheel with its all-new black center cap.
Not included: Tires and lug hardware are not part of this product.










