Overview
The Method Race Wheels MR703 17×8.5 is an aluminum off-road wheel with an 8 on 6.5 bolt pattern, offset 0 and a Matte Black finish. It belongs to the MR703 Bead Grip series and carries part number MRWMR70378580500. It has a universal fit label, so fit depends on your own hub and brake clearance.
Method Race Wheels was founded to build wheels for off-road racing, and each design is engineered for its intended use. Every wheel goes through Finite Element Analysis and field testing, with the aim of a wheel that is lighter and stronger. For heavier builds, confirm load ratings before choosing this wheel.
Key features
- 17-inch diameter and 8.5-inch width with a Matte Black finish.
- Windowed style from the MR703 Bead Grip series.
- Aluminum construction, per the specification lines.
- 8 on 6.5 bolt pattern with a center bore of 131.
- Offset 0 and backspacing 4.75, which control where the wheel sits in the wheel well.
- Method says each design is built with Finite Element Analysis and field testing.
- The brand describes its aim as lighter weight with greater strength.
Bead seating on Bead Grip rims
Bead Grip rims are built to hold the tire bead, but the bead still has to seat properly before the tire is inflated. Use a bead lubricant and a tire shop equipped for this type of rim. Inflate in short bursts while watching the bead line, and stop if the bead does not pop into place at the rim edge.
After the tire is on, check brake calipers, suspension parts and fender clearance with the wheel installed. Offset 0 and backspacing 4.75 set how far the wheel face sits from the hub, so a small change in stance can decide between clean clearance and rubbing. Recheck tire pressure after the first drive.
- Use bead lubricant before inflating
- Inflate in short bursts
- Check clearance around calipers and suspension
- Recheck tire pressure after the first drive
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70378580500 |
| Series | MR703 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 8 on 6.5 |
| Offset | 0 |
| Center bore | 131 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
No vehicle, year or trim is tied to this wheel. Its fit depends on your own hub, so compare the 8 on 6.5 bolt pattern, 0 offset, 4.75 backspacing and 131 center bore against your axle and brake setup before ordering. Wheels with different backspacing can rub on suspension or fenders, so measure clearance first.
Fitment is not vehicle-specific. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tire mounting on Bead Grip rims should go to a shop comfortable with bead seating on this design. Once the tire is on, check brake calipers, suspension and fender clearance, since offset 0 and backspacing 4.75 set how far the face sits from the hub.
What’s included
The wheel is sold alone. Tires, lug nuts and valve stems need to be obtained separately.











