Overview
The Method Race Wheels 314 is a 17 Inches by 8.5 Inches spoke wheel in Matte Black, drilled for a 5 on 5 bolt pattern. Part number MRWMR31478550500 identifies it within the MR314 series from Method Race Wheels, a maker of wheels aimed at the off road racing community.
The wheel is designed for its intended use and checked with finite element analysis and field tests. It is a universal fit design, so no specific vehicle is named. The 72 center bore and zero offset are the figures to compare with your hub before fitting.
Key features
- 17 Inches diameter and 8.5 Inches width
- 5 on 5 bolt pattern
- Center bore 72
- Offset 0 and backspacing 4.75
- Spoke design in Matte Black
- Aluminum construction
Hub centering basics
On a wheel with a center bore, the bore should sit closely over the hub so the wheel is located by the hub rather than by the lug nuts alone. The lug nuts clamp the wheel to the hub face, but they are not meant to center it. When the bore is wider than the hub pilot, a matching hub-centric ring closes the gap and keeps vibration down during highway speeds.
Five-lug patterns are common on trucks and SUVs, and a wheel that looks correct can still seat unevenly if the mounting face is dirty or rusted. Clean the hub and the back of the wheel, then check the bolt holes for rounding. Wheel spacers are sometimes used to change clearance, but each one adds a second contact surface and needs its own check.
- Clean rust and debris from the hub face before mounting
- Use the correct seat style for the lug hardware
- Re-torque after the first drive and again after a few days
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31478550500 |
| Series | MR314 |
| Style | Spoke |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | 0 |
| Backspacing | 4.75 |
| Finish | Matte Black |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
No year, make, model or trim applies to this wheel, since it is a universal fit design. The 5 on 5 bolt pattern and 72 center bore must match the hub before the wheel is considered for any application.
A universal fit label is a sizing statement, not a clearance guarantee for a particular truck or car.
Installation notes
Confirm the 5 on 5 pattern and 72 center bore against the hub, then check the zero offset against brake and suspension clearance. Confirm the lug seat type before mounting, since it must suit your lug hardware.
What’s included
The title identifies a single Matte Black wheel from the MR314 series.
Not included: The wheel comes without tires, valve stems or lug hardware.










