Overview
The Method Race Wheels 701 Trail Series 18×9 in matte black, part number MRWMR70189016518, is a one-piece cast aluminum trail wheel for a 6 on 135 bolt pattern. It uses the brand’s Bead Grip design in the MR701 series, aimed at off-road use where tires run at lower pressures.
The wheel has an 18 inch diameter, 9 inch width, offset 18 and backspacing 5.75, with a center bore of 87. It is engineered with finite element analysis and field testing, and it is cast from 356 aluminum with T6 heat treatment.
Owners who spend time on uneven trails and want a bead design meant for reduced pressure will find the main engineering points listed below.
Key features
- Bead Grip design to engage the tire bead seat and improve grip at reduced air pressure
- Race-derived reinforced inner lip, per the manufacturer
- Safety hump on both bead seats intended to stabilize the tire and prevent de-beading
- Windowed style with matte black finish
- One-piece cast 356 aluminum with T6 heat treatment
- Finite element analysis and field tests cited by the maker during development
Fender and steering clearance
Offset and backspacing decide how far the wheel sits inside or outside the fender. An 18 offset places the mounting face relative to the hub, which changes where the tire sits at full lock and over bumps. Tire diameter and width shift these results as well, so a tire that works on one wheel may rub on another.
Before mounting, turn the steering from lock to lock and cycle the suspension through its travel. Look for contact with the brake caliper, the control arms and the fender lip. Lift kits and wider tires often reduce clearance, so retest after any change.
- Test-fit with the exact tire you plan to run
- Check brake caliper clearance through full steering travel
- Recheck clearance after suspension or tire changes
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70189016518 |
| Series | MR701 Bead Grip |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 18 |
| Backspacing | 5.75 |
| Construction | One-piece cast 356 aluminum, T6 heat treated |
| Style | Windowed |
| Finish | Matte Black |
Vehicle fitment
Fitment is universal, with no specific vehicle, year or chassis attached. Compare the 6 on 135 bolt pattern, 87 center bore and 18 offset with your hub’s dimensions, since those decide whether the wheel mounts at all.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Offset 18 and backspacing 5.75 set how far the wheel sits inside or outside the fender, so check the tire’s outer diameter and width against your fender and steering clearance. Center bore 87 should be checked against the hub so the wheel is centered rather than held only by lug nuts. If the center bore does not match the hub, ask a qualified installer whether a centering ring is needed before mounting.
What’s included
Tires and lug hardware are not part of this wheel.
Not included: Plan for tires, lug nuts and center caps as separate items.









