Overview
This Matte Black Method Race Wheels MR605 NV in 20×12 size, part number MRWMR60521250552N, is drilled for a 5 on 5 bolt pattern. It is part of Method’s 600 Series and an evolution of the MR305 NV, with a wider face and deeper dish. The maker positions the design for lifted trucks, Jeeps and SUVs that run five lug hubs.
The 20×12 size has a 5.25 inch lip, deeper than the 3 inch lip on the 20×10 version. A snap-in cap with a raised logo covers the 5 and 6 lug center, and the wheel carries a 2650 lb rating for 5 and 6 lug applications.
Key features
- Matte Black finish on a one-piece aluminum wheel
- Street-Loc lip with removable stainless steel bolts
- 5.25 inch lip on the 20×12 size
- Snap-in center cap with raised Method logo for 5 and 6 lug applications
- Two debossed Method logos around the bolt circle
- 2650 lb load rating for 5 and 6 lug applications
Wide wheels and tire rub
A wider wheel moves the tire closer to the fender and suspension at full steering lock. Rub points often appear first at the tire shoulder, where the sidewall bulges under load. Measuring at full lock and at full suspension travel reveals contact that a static check misses, so plan a test run at low speed before highway use.
Tire choice affects clearance as much as the wheel does. Tires with wider treads and taller sidewalls take more room, while lower-profile tires leave less space for the wheel to flex. Check tire pressure before each trip, since air pressure changes how the sidewall sits.
- Test steering lock with the tire installed
- Inspect tire shoulders for rub marks
- Re-check after any tire or suspension change
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR60521250552N |
| Series | MR605 NV |
| Wheel diameter | 20 Inches |
| Wheel width | 12 Inches |
| Offset | -52 |
| Center bore | 72 |
| Backspacing | 4.5 |
| Bolt pattern | 5 on 5 |
| Lip | 5.25 inch lip on the 20×12 size |
| Load rating | 2650 lbs (5 and 6 lug) |
| Style | Windowed |
| Finish | Matte Black |
| Construction | Aluminum |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit is the only fitment term shown, so the wheel is not tied to a named vehicle. Fit comes down to the 5 on 5 pattern, 72 center bore and -52 offset, which should be measured against the hub and fender of the vehicle in question.
Eight lug wheels in this series use a bolt-on cap, a different center design from this snap-in version. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A -52 offset sits the wheel further outward than a standard offset, so check fender and steering clearance on lifted vehicles before mounting. Confirm the 72 center bore suits your hub as well.
What’s included
The wheel includes its center ring, snap-in cap and stainless steel lip bolts as part of the design described above.
Not included: tires.










