Overview
The Method Race Wheels MR605 NV in matte black is a 20×10 windowed aluminum wheel, part number MRWMR60521050524N, built on a 5 on 5 bolt pattern. It leads the brand’s 600 Series, which Method describes as a step up in aggression from the MR305 NV.
The design suits lifted trucks, Jeeps and SUVs. The 20×12 size with a 5.25-inch lip is also in the series, while the 20×10 has a 3-inch lip. Bolt pattern, center bore and offset must be matched to the hub before any purchase decision.
Offset is the distance from the mounting face to the wheel centerline. Backspacing is the distance from the mounting face to the inner rim edge. This wheel has an offset of -24 and backspacing of 4.55, which affect clearance against suspension and brake parts.
Key features
- One-piece wheel with Method’s Street-Loc lip
- Removable stainless steel bolts set around the lip
- Bolt-on aluminum center ring with a snap-in cap and raised Method logo for 5 and 6 lug versions
- Two debossed Method logos around the bolt circle
- Matte black finish with a windowed style
- Load ratings of 2650 lbs for 5 and 6 lug and 3640 lbs for 8 lug
Caring for a matte black finish
Matte finishes do not respond to polishing the way gloss paint does, and abrasive pads can leave shiny patches. Wash with a pH-neutral cleaner and a soft brush, then rinse thoroughly. Brake dust bonds to the surface more readily on dark finishes, so clean the inner barrel and spokes regularly to keep the look even.
Windowed wheels collect grit in the openings, so clear those areas after off-road runs. Check the snap-in cap seats fully, and inspect the lip bolts for looseness after the first few drives. Look for cracks around the window edges and scrapes on the lip, which indicate contact with rocks or curbs.
- Use a soft brush on the window edges
- Re-check lip bolt tightness after the first drives
- Inspect the snap-in cap seating before each trip
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR60521050524N |
| Series | MR605 NV |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -24 |
| Backspacing | 4.55 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | Aluminum |
| Lip width | 3 inches (20×10 size) |
| Load rating | 2650 lbs (5 and 6 lug) |
| Fitment label | Universal Fit |
Vehicle fitment
Method’s sheet reads Universal Fit, which is a general label rather than a vehicle match. Because the 5 on 5 pattern, 72 center bore and -24 offset must suit one specific hub, fitment cannot be confirmed from the label, and no vehicle is listed.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 5 on 5 pattern and 72 center bore against your hub, then measure the -24 offset against the fender and brake calipers. Lifted vehicles frequently have less clearance, so recheck after any suspension work. Do not drive on wheels that rub or are not seated fully.
What’s included
Its center ring, snap-in cap and lip bolts come with the wheel, but tires, lug nuts and valve stems do not.
Not included: Tires, lug nuts and valve stems are not part of this wheel.










