Overview
Part MRWMR70478580800 is the Method Race Wheels 704 Trail Series in 17×8.5 with an 8 on 6.5 bolt pattern and a matte titanium finish. It is built from one-piece cast 356 aluminum, with an offset of 0, a 131 center bore and a 4.75 backspacing. It is designed for trail and off-road use and is universal fit rather than built for a named vehicle.
The Bead Grip design is the headline feature of this line. Its grip engages the tire bead seat, which helps when tires run at lower air pressures. A reinforced inner lip based on race wheel design supports the bead, and a safety hump on both bead seats helps keep the tire from de-beading. The wheels were developed with Finite Element Analysis and field testing, with a focus on less weight and more strength.
Key features
- Patent pending MR704 Bead Grip, which grips the tire bead seat at lower air pressures
- One-piece cast 356 aluminum with T6 heat treatment
- Reinforced inner lip based on race wheel design
- Aggressive safety hump on inner and outer bead seats
- Matte titanium finish in a windowed style
- Developed through Finite Element Analysis and field testing
Setup checks before the first trip
Before the first trail trip, mount the tire, seat the bead at normal inflation, then confirm the bead looks even all the way around. Uneven seating can leave a gap that lets air escape or lets the tire shift on the wheel. Spin the wheel slowly and watch for wobble, and re-check the seat after the first short drive.
Torque and clearance are the next checks. Tighten lug nuts evenly and recheck them after the first few miles. Look at the brake caliper, suspension arms and fender lip while turning the wheel to full lock. A rubbing tire can damage the sidewall and cause vibration that looks like a balance issue.
- Check bead seating at normal pressure first
- Spin the wheel and watch for wobble
- Inspect clearance at full steering lock
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70478580800 |
| Series | MR704 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 8 on 6.5 |
| Offset | 0 |
| Center bore | 131 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Matte Titanium |
| Construction | Cast 356 aluminum, T6 heat treated |
| Fitment field | Universal Fit |
Vehicle fitment
This is universal fit, so no particular vehicle is covered. Use the 17 inch diameter, 8.5 inch width, 8 on 6.5 bolt pattern, 0 offset and 131 center bore to check your hub before mounting. Confirm the fit against your own vehicle’s dimensions.
A wheel with a different bolt pattern or center bore will not seat correctly on this hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bead Grip is for running lower air pressures, so set pressure within the range the tire is rated for. Backspacing and offset control how far the wheel sits inside the fender and against the brakes, so measure clearance before the wheel goes on a vehicle.
What’s included
Confirm the package contents against your installation before starting.
Not included: Tires and lug hardware are not part of this wheel’s data.














