Overview
The Method Race Wheels MR312 in 18×9 is an aluminum split-spoke street wheel with a 5 on 150 bolt pattern and part number MRWMR31289058918. It comes in a Bronze/Black colorway, and its design is modeled after the 106 Beadlock, dating to 2018. It suits owners who want one wheel for daily driving or weekend trail use.
The wheel uses the all-new v.3 Stree-Loc ring, and its removable stainless steel bolts around the lip are protected against shearing. A concave split-six spoke face keeps the look clean and simple, with a subtle Method debossing at the end of one spoke. Sizes offered in the MR312 line are 17 inch and 18 inch.
Key features
- v.3 Stree-Loc ring
- Removable stainless steel bolts around the lip, protected against shearing
- Concave split-six spoke design
- Subtle Method debossing at the end of one spoke
- Aluminum construction in a Bronze finish
- 17 inch and 18 inch sizes offered in the MR312 line
Matching the hub
The hub is the part of the vehicle that matters most for a wheel’s first fit. Its pilot diameter and bolt pattern must agree with the wheel’s bore and holes, and any mismatch will show up as vibration or uneven lug torque. Taking a few careful measurements before mounting saves time and prevents wheels from being forced onto the studs.
Backspacing and offset together decide where the tire sits against the suspension and brake parts. Small changes can clear a caliper or move the tire outward, so test fit before the tire is installed. Wheel bearings, ball joints and tie rod ends should also be inspected whenever a wheel size or offset changes, since the loads shift.
- Clean the hub face and studs before mounting
- Torque lug nuts in a star pattern
- Recheck torque after the first few drives
- Look for rubbing on the inner barrel after a turn
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31289058918 |
| Series | MR312 |
| Diameter | 18 inch |
| Width | 9 inch |
| Bolt pattern | 5 on 150 |
| Center bore | 111 |
| Offset | 18 |
| Backspacing | 5.75 |
| Style | Split spoke |
| Finish | Bronze |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for this wheel, and no make, model or year is attached. Compare the 5 on 150 pattern and 111 center bore with your hub, and check offset 18 and backspacing 5.75 against your suspension and brake clearance before mounting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The wheel includes a bolt-on center cap and the hardware for that cap.
Not included: Tires, lug nuts and valve stems are not part of this package, so plan to source them separately.










