Overview
The Method Race Wheels 702 Series 16×8 wheel in Bronze, part number MRWMR70268060900, is an aluminum spoke wheel on a 6 on 5.5 bolt pattern with a 106 center bore. Method Bronze and Bronze refer to the same finish on this wheel.
Method built this wheel for off-road racing. Finite element analysis and field testing were used during development. Zero offset and 4.5 backspacing set where the wheel sits relative to the hub, so measure before mounting it on any vehicle.
Key features
- Bronze finish on a spoke design
- Part of the MR702 Bead Grip series
- 16 inch diameter with 8 inch width
- 6 on 5.5 bolt pattern and 106 center bore
- Offset 0 with backspacing 4.5
- Aluminum construction
- Field testing for off-road use was part of its development.
Measuring for a proper fit
A correct fit starts with the hub. The center bore should match the hub hub-centric diameter so the wheel centers on the hub rather than on the lug studs. When the bore is slightly off, vibration and uneven lug torque can follow, especially at highway speed.
Backspacing and offset decide where the inner lip of the wheel sits. If the backspacing is too short for the installed brake caliper or too long for the fender, the tire may rub. Measure the old wheel first, then compare those figures before ordering a replacement.
Once mounted, check clearance at full steering lock and with the suspension compressed. Recheck lug nut torque after the first few drives, because new wheels can settle slightly against the hub face.
- Hub bore against the center bore
- Backspacing against caliper clearance
- Tire width against fender room
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70268060900 |
| Series | MR702 Bead Grip |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 0 |
| Backspacing | 4.5 |
| Style | Spoke |
| Finish | Bronze |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for MRWMR70268060900. The spec sheet gives Universal Fit, which is a general label and not a vehicle match, so the bolt pattern, center bore and backspacing need checking against the axle and caliper on your vehicle.
Compare the offset and backspacing with the wheel you are replacing before choosing this design. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the wheel is covered here. Check the package contents against your installation before starting.
Not included: Tires and lug nuts are not included.














