Overview
The Method Race Wheels 701 Trail Series 17×9 in Matte Black, part number MRWMR70179080512N, is an eight-bolt aluminum off-road wheel with an 8 on 6.5 pattern and a 131 center bore. Its listed offset is -12, the backspacing is 4.6, and the design is the windowed style within the MR701 Bead Grip series.
Method makes the wheel from one-piece cast 356 aluminum with T6 heat treatment. Bead Grip, a patent-pending feature, is said to engage the tire bead seat so the tire keeps grip at reduced pressures, which matters for trail work. The reinforced inner lip borrows from Method’s race wheel line, and the humps on the inner and outer bead seats are meant to stabilize the tire under load.
Key features
- Bead Grip technology, patent pending, that holds the tire bead seat for better grip
- One-piece cast 356 aluminum construction with T6 heat treatment
- Reinforced inner lip based on race wheel engineering
- Bead seat humps on the inner and outer sides to help resist de-beading
- Windowed styling in Matte Black
- Method says finite element analysis and field tests were used to reduce weight while raising strength
Running lower pressures safely
Lowering tire pressure lets the tire conform to rocks and ruts, which improves traction on loose ground. That softer sidewall also puts more load on the bead, so the tire can creep off the rim during hard cornering or after an impact. A bead seat designed to grip the tire helps hold it in place, but it works alongside correct inflation rather than replacing it. Air down in small steps and set pressure before the trail, not on it.
Wheel width matters when you choose tire size. A wider rim supports a wider tire with a more stable bead, while a mismatch can stretch the tire or weaken the sidewall. Reinforced inner lips help with impacts, but they do not protect a tire from a sharp cut, so inspect the sidewalls after each run.
- Reseat the bead with a proper tool if the tire shifts
- Carry a portable compressor to restore pressure before pavement
- Look for bead wear or scuffs after rock sections
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70179080512N |
| Series | MR701 Bead Grip |
| Style | Windowed |
| Finish | Matte Black |
| Construction | One-piece cast 356 aluminum, T6 heat treated |
| Wheel diameter | 17 Inches |
| Wheel width | 9 Inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | -12 |
| Backspacing | 4.6 |
Vehicle fitment
No year, make, model or chassis is attached to this wheel, and it carries a Universal Fit designation. Before choosing an 8 on 6.5 wheel, confirm that it matches your hub’s bolt count and center bore.
The 131 center bore needs to suit your hub, and an eight-bolt pattern will not fit a hub with a different layout. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 8 on 6.5 pattern and 131 center bore against your hub before the wheel is installed. Keep trail tire pressures in mind, because Bead Grip is intended for running lower air pressures, and recheck seating after inflating.
What’s included
Check the package contents against your installation before starting.
Not included: Tires, valve stems and lug nuts are not part of this wheel.









