Overview
The Method Race Wheels MR701 17×9 in Bahia Blue, part number MRWMR70179060612N, is a 17-inch aluminum off-road wheel measuring 9 inches wide, with a 6 on 5.5 bolt pattern. It is a universal fit wheel, so no particular year, make or model is named.
This windowed wheel is part of the MR701 Bead Grip series and carries a -12 offset with a 106 center bore. Each design is built for off-road racing and engineered through finite element analysis and field testing. The aim is less weight with more strength. A negative offset pushes the wheel outward toward the fender compared with a zero-offset wheel, so check the 4.6 backspacing and -12 offset against your hub and clearance.
Key features
- 17-inch by 9-inch aluminum construction
- Windowed style finished in Bahia Blue
- 6 on 5.5 bolt pattern
- -12 offset and 4.6 backspacing as given
- 106 center bore
- MR701 Bead Grip series engineering
Offset and tire fit
A negative offset moves the wheel outward, so the tire sits closer to the fender and can alter steering geometry. The 9 inch width adds to that outward position if the tire is also wide. Check fender liner clearance, the steering knuckle area and the outer tie rod, and adjust the tire choice before the first drive.
Scrub radius and steering feel change with offset. Negative offset can make steering feel heavier and cause the tire to pull on bumps, so test drive at low speed first. Look for rub marks on the fender edge after the first few miles, and recheck after any suspension change or tire swap.
- Test steering at low speed first
- Check fender liner contact at full lock
- Recheck after a suspension change
- Confirm tire width before buying
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70179060612N |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Offset | -12 |
| Center bore | 106 |
| Backspacing | 4.6 |
| Bolt pattern | 6 on 5.5 |
| Finish | Bahia Blue |
| Style | Windowed |
| Series | MR701 Bead Grip |
| Construction | Aluminum |
Vehicle fitment
Universal fit is the only fitment given for this wheel, so no model is confirmed. Match the 6 on 5.5 bolt pattern, 106 center bore and -12 offset to your hub, then check tire and caliper clearance, because the negative offset changes how far the wheel sits outward.
Other offsets and bore sizes will not suit the same hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure fender and caliper clearance with the planned tire before mounting, since the -12 offset moves the wheel outward. Confirm lug seat type, load rating and hardware for your installation before mounting.
What’s included
This entry covers the wheel itself. Check the package contents against your installation before starting.
Not included: Check whether tires, lug nuts and center caps are needed for your installation and obtain them separately.











