Select your vehicle

Method Race Wheels MR312, 17x9 with 6x5.5 Bolt Pattern – Method Bronze/Black – MR31279060912N

Method Race Wheels

$419.00In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 3:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Method Race Wheels MR312 17×9 in Method Bronze/Black, part MRWMR31279060912N
  • 6 on 5.5 bolt pattern, center bore 106, offset -12, backspacing 4.5
  • Aluminum wheel with concave split-six spoke face
  • Removable stainless steel lip bolts and v.3 Stree-Loc ring
  • Bolt-on center cap with hardware included

Description

Overview

The Method Race Wheels MR312 in 17×9 with a Method Bronze/Black finish is a 6 on 5.5 aluminum street wheel with a 106 center bore. Part number MRWMR31279060912N. It is built for trucks, Jeeps and SUVs used as daily drivers or weekend rigs.

Method’s 2018 street design takes its styling from the 106 Beadlock and uses a concave split-six spoke face. The v.3 Stree-Loc ring holds removable stainless steel bolts around the lip, and those bolts are protected against shearing. It is a universal fit wheel, so match the bolt pattern and center bore to your own vehicle.

Key features

  • Concave split-six spoke design with a clean look
  • v.3 Stree-Loc ring
  • Removable stainless steel bolts around the lip, protected against shearing
  • Method debossing at the end of one spoke
  • Bronze and black finish
  • Bolt-on center cap with hardware included

Choosing a wheel for your hub

Bolt pattern and center bore are the first checks for any wheel, and they should be confirmed before the tire is even considered. The center bore needs to match the hub pilot so the wheel seats on the hub rather than sitting only on the lug nuts. A small mismatch often shows up as vibration at speed, which is hard to trace later.

Offset and backspacing determine how far the wheel sits inside or outside the fender, and where the tire meets brake calipers and suspension arms. Tire width, lift height and any wheel spacers all change those clearances. Re-check them whenever one of those parts changes, because a setup that clears at ride height can rub on compression.

  • Torque lug nuts again after the first few drives
  • Inspect lip bolts during each tire rotation
  • Look for cracks near spoke roots after rough trail use

Specifications

Brand Method Race Wheels
Part number MRWMR31279060912N
Series MR312
Wheel diameter 17 Inches
Wheel width 9 Inches
Bolt pattern 6 on 5.5
Center bore 106
Offset -12
Backspacing 4.5
Style Split Spoke
Finish Bronze (Method Bronze/Black)
Construction Aluminum

Vehicle fitment

No make, model or model year is attached to this wheel. Method’s universal fit description and the general mention of trucks, Jeeps and SUVs do not confirm a match for any single vehicle.

Compare the 6 on 5.5 bolt pattern and 106 center bore with your hub first. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm that the 106 center bore matches your hub’s pilot before mounting, since a mismatch will not center the wheel. The -12 offset and 4.5 backspacing decide how the wheel sits in the fender, so check brake and suspension clearance first.

What’s included

The wheel comes with a bolt-on center cap and the hardware that fastens it.

Not included: Tires.

SKU: MRWMR31279060912N Categories: ,

Questions & Answers

What finish and part number is MRWMR31279060912N?

It is the Method Bronze/Black finish version of the 17x9 MR312. It has a 6 on 5.5 bolt pattern, 106 center bore and -12 offset. The part number is MRWMR31279060912N.

Can I use this wheel on any Jeep?

No specific Jeep models or years are named for this wheel. It is a universal fit wheel, so confirm the bolt pattern, center bore and offset against your Jeep before mounting or ordering.

What is the backspacing on this wheel?

The backspacing is 4.5 for this 17x9 wheel. Backspacing is the distance from the mounting face to the inner lip, so it helps you judge clearance to brakes and suspension parts.

How do I know if the lip bolts need attention?

Inspect them during tire rotations and after hard trail use. Look for looseness, corrosion or a gap between the bolt and the ring, and tighten or replace any bolt that does not sit firmly. A loose lip bolt should be fixed before the wheel sees more use.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon