Overview
The Method Race Wheels Double Standard 15×8 is a black aluminum spoke wheel with a 6 on 5.5 bolt pattern, part number MRWMR30458060524N, from the MR304 Double Standard series.
The wheel has a 108 center bore, a -24 offset and 3.5 backspacing. Method designed it through analysis and testing aimed at reducing weight while adding strength. The 6 on 5.5 pattern suits hubs with that bolt circle. Check these figures against your vehicle before ordering.
Key features
- Six-lug 6 on 5.5 bolt pattern
- Black spoke face on aluminum construction
- 108 center bore
- Offset of -24 and backspacing of 3.5
- Method describes development through analysis and field testing
- Method’s stated goal is a wheel that is lighter and stronger
Wheel offset and backspacing
Offset and backspacing decide where a wheel sits in the wheel well. A negative offset pushes the mounting face outward, which moves the tire toward the fender and can change clearance near the outer suspension and brake calipers. Backspacing shows how much room the inner barrel has behind the mounting face, so it matters for control arms, springs and brake lines on the inside of the wheel.
Changing the wheel size often means revisiting the offset, since a wider wheel with the same offset moves the tire outward. Check the tire’s overall diameter when the tire size changes, because a larger tire can rub at full lock or under compression on the trail.
- Measure the hub bore before fitting
- Torque lug nuts in a star pattern after the first drive
- Recheck clearance after any suspension lift
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30458060524N |
| Series | MR304 Double Standard |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Black |
| Wheel diameter | 15 inches |
| Wheel width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -24 |
| Backspacing | 3.5 |
| Fitment | Universal Fit |
Vehicle fitment
The wheel is a Universal Fit design rather than one tied to a specific vehicle. Measure your hub’s bolt pattern to confirm the 6 on 5.5 match, then compare the 108 center bore and -24 offset with your vehicle’s requirements.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A -24 offset shifts the wheel outward, so check brake caliper and suspension clearance before mounting. The 3.5 backspacing governs the inner barrel’s clearance, and the 108 center bore should be confirmed against the hub before the wheel is fitted.
What’s included
Tires, lug nuts and valve stems are not part of this wheel.
Not included: Tire and lug nuts









