Overview
Method’s MR312 in Matte Black, part MRWMR31278560500, is a 17 by 8.5 inch aluminum wheel with a 6 on 5.5 bolt pattern and a 106 center bore. Method presents it as a street wheel for trucks, Jeeps and SUVs, using Universal Fit rather than a single vehicle name.
Method ties the design to its 106 Beadlock. The face is a concave split-six spoke with a debossed Method mark on one spoke, and the newer v.3 Stree-Loc ring is part of the build. Stainless steel bolts sit around the lip and are removable. Measure the 6 on 5.5 pattern, 106 center bore and 4.75 backspacing against your hub before fitting.
Key features
- Concave split-six spoke face with a subtle Method debossing
- The v.3 Stree-Loc ring is the newer lip design used on this wheel.
- Stainless steel lip bolts that are removable
- Matte Black finish with aluminum construction
- 6 on 5.5 bolt pattern in a 17 by 8.5 inch size
- Bolt-on center cap with hardware
Lug fit and hub match
A 6 on 5.5 pattern places six studs on a 5.5 inch bolt circle. Matching that circle to the hub is the first step, because even a small mismatch keeps the wheel from seating flat against the hub face. Lug nuts should seat fully in the wheel’s seats, so check the seat type before tightening.
Because lug count and bolt circle are fixed by the hub, the rest of the setup is about clearance. Center bore, offset and backspacing decide how the tire sits. Recheck torque after the first few drives and inspect the studs for thread damage during service.
- Match the lug seat type to the nut
- Check torque after the first drives
- Inspect studs for thread damage before mounting
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31278560500 |
| Series | MR312 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
No single vehicle is named for this wheel. Method’s Universal Fit label covers most trucks, Jeeps and SUVs, so the wheel is not vehicle-specific. Check the 6 on 5.5 bolt pattern and 106 center bore against your hub before deciding.
Universal Fit does not confirm clearance for any one vehicle, so check offset and backspacing against your own hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Center bore is the opening that sits over the vehicle’s hub, and a close match helps the wheel center properly. Confirm the 106 figure before the wheel goes on. Install the bolt-on center cap with the supplied hardware. Offset 0 and backspacing 4.75 affect how the wheel clears calipers and suspension parts, so check that after the tire is mounted.
What’s included
The bolt-on center cap and its hardware come with the wheel. Confirm your tire and lug nut needs before ordering.










