Overview
Part number MRWMR31278516900 identifies the Method Race Wheels MR312, a 17 by 8.5 inch aluminum wheel with a 6 on 135 bolt pattern in Method Bronze/Black. Method positions it for daily drivers and weekend rigs, and gives it Universal Fit for most trucks, Jeeps and SUVs without naming one model.
The MR312 is modeled after the 106 Beadlock. Its split-six spoke face is concave, one spoke carries a small debossed Method name, and the wheel uses the v.3 Stree-Loc ring. Removable stainless steel bolts ring the lip. Because the wheel is universal fit, the 6 on 135 pattern, 0 offset and 87 center bore should be matched to your hub before mounting.
Key features
- Concave split-six spoke face with a small debossed Method name
- v.3 Stree-Loc ring
- Removable stainless steel bolts around the lip
- Aluminum construction with a Method Bronze/Black finish
- 17 by 8.5 inch size, 6 on 135 bolt pattern, center bore 87
- Bolt-on center cap with hardware
Hub fit and clearance
A bolt pattern is made of two numbers: the lug count and the bolt circle diameter. Both must match your hub exactly, because a wheel that does not line up on the studs cannot be seated safely. The center bore is the opening that sits over the hub, and it should fit snugly so the wheel is centered rather than held only by the lug nuts.
Clearance decides whether a tire rubs anything. Zero offset places the mounting face at the wheel’s centerline, and the 4.75 backspacing sets how far the back lip sits behind the face. Both affect brake caliper room, fender clearance and suspension travel. Check clearance with the tire mounted and turn the wheel from lock to lock, and recheck after any suspension or tire size change.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31278516900 |
| Series | MR312 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Split Spoke |
| Finish | Method Bronze/Black |
| Construction | Aluminum |
Vehicle fitment
Method lists no specific vehicle for this wheel. Its Universal Fit designation means the wheel is not sized for one truck, Jeep or SUV, so the bolt pattern, offset and center bore have to be checked against your own vehicle.
Clearance is not confirmed for any model, so check it on your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bolt pattern names the lug count and the bolt circle size, so 6 on 135 must match your hub exactly. Center bore is the hub opening the wheel sits over, and 87 is the figure to compare. Start by checking that it suits your hub, then fit the included bolt-on center cap and hardware. The 0 offset and 4.75 backspacing mean brake and suspension clearance should be checked after the tire is mounted.
What’s included
Hardware for the bolt-on center cap comes with the wheel. Tires and lug nuts are not part of the package.










