Overview
The Method Race Wheels MR108 Beadlock 17×9 is an aluminum beadlock wheel with a 6 on 5.5 bolt pattern, a gloss titanium finish and part number MRWMR10879060844B. Its nine-spoke design carries a debossed Method logo on one spoke. It is the first wheel in the MR108 line to combine Beadlock with patented Bead Grip technology.
A bead seat on the inner lip helps hold the tire securely, and extra material in high-stress areas supports a 4,000 lbs load rating. The offset is -44, backspacing is 3.5 and center bore is 106. Check weight and vehicle fit against your own build before buying.
Key features
- Beadlock style with a bead seat on the inner lip
- Patented Bead Grip technology
- Extra material in high-stress areas
- Stated load rating of 4,000 lbs
- Nine-spoke design with a debossed Method logo on one spoke
- 17×9 size on a 6 on 5.5 bolt pattern
Beadlock setup and tire mounting
A beadlock wheel clamps the tire bead to the wheel with a locking ring, which helps when running low tire pressures where a standard bead could slip off the rim. Beadlock setups need compatible tires and rings, and mounting is best done by a shop that knows beadlock procedures, since the bead and ring must seat correctly before air is added.
Because a beadlock wheel carries a stated load capacity, avoid overloading it and check tire pressure and bead seat before each run. After rough off-road use, look at the ring, bolts and bead area for damage or loosening, and retorque fasteners to your vehicle’s specified value.
- Use only compatible beadlock rings and hardware
- Inspect bead seats after each trail session
- Keep tire pressure within the tire’s rated range
- Plan for extra weight from rings and tires
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR10879060844B |
| Series | MR108 Beadlock |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | -44 |
| Backspacing | 3.5 |
| Style | Beadlock |
| Finish | Titanium |
| Construction | Aluminum |
| Load rating | 4,000 lbs |
Vehicle fitment
Method lists Universal Fit for this wheel and names no year, make or model. A -44 offset pushes the mounting face outward relative to the wheel centerline, which changes clearance at the fender, brakes and steering components. Confirm the 6 on 5.5 bolt pattern and 106 center bore against your hub first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting, including lug nuts, center caps and valve stems.











