Overview
The Double Standard 15×8 is a black aluminum spoke wheel with a 5 on 4.5 bolt pattern, part MRWMR30458012524N. It is 15 inches in diameter and 8 inches wide and belongs to the MR304 Double Standard series.
Method built the line for the off-road racing community and describes its wheels as designed for their intended use. The 83 center bore and -24 offset mean the wheel’s hub fit and its position in the wheel well both need checking against the vehicle before ordering.
Key features
- Black spoke face on aluminum construction
- 5 on 4.5 bolt pattern, the hub layout the wheel is made to match
- 83 center bore for hub centering
- Offset of -24 with 3.5 backspacing
- Its design was analyzed with finite element methods and field tested.
- The aim is less weight without giving up strength.
Center bore and hub seating
The center bore is the opening that locates the wheel on the hub. When the bore is larger than the hub face, the wheel is held only by the lug studs, which can allow vibration and wear. A snug fit against the hub is the goal, and a centering ring is the usual way to close a gap.
Lug nut seat type matters as much as the bore. Conical seats need a matching taper, while ball seats need a spherical face, and using the wrong seat can loosen the wheel under load. Confirm the seat type your studs require before ordering nuts, and tighten in a star pattern once the wheel is seated.
- Match lug seat type to the wheel’s seat
- Check stud threads for damage before mounting
- Wipe the hub face clean before setting the wheel
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30458012524N |
| Series | MR304 Double Standard |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Black |
| Wheel diameter | 15 inches |
| Wheel width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -24 |
| Backspacing | 3.5 |
| Fitment | Universal Fit |
Vehicle fitment
This wheel is universal fit, so no vehicle, model year or chassis code is tied to it. Fit depends on the bolt circle and center bore, so compare the 5 on 4.5 pattern, 83 center bore and -24 offset with the vehicle before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The -24 offset pushes the wheel outward, which can change how it clears a fender or brake caliper, so measure clearance before mounting. Check that the 83 center bore clears the hub face, and use a centering ring if the hub is smaller than the bore.
What’s included
The wheel is sold alone, without tires, lug nuts or valve stems.
Not included: tires, lug nuts and valve stems.









