Overview
Method’s 704 Trail Series 17×8.5 wheel in Matte Titanium, part number MRWMR70478516800, is a one-piece cast aluminum wheel with a 6 on 135 bolt pattern. It comes from the MR704 Bead Grip line and is designed for off-road applications.
Method Race Wheels was founded around wheels for off-road racers, and this 704 was engineered for that audience. Each wheel went through numerous Finite Element Analysis studies and field tests before release. The line aims to cut weight and add strength. The center bore of 87, offset of 0 and backspacing of 4.75 are the measurements to match against a hub.
Key features
- Bead Grip design, which Method says grips the tire bead seat for lower running pressures
- Cast 356 aluminum, one-piece construction, T6 heat treated
- Inner lip reinforced using race wheel design
- Inner and outer bead seats each have an aggressive safety hump to help prevent de-beading
- Windowed style and Matte Titanium finish
- Finite Element Analysis and field testing used in development
Choosing trail tires
Tires and wheels work as one assembly. A tire with a stiff, well-built bead and a sidewall rated for the load will sit more reliably on a bead grip design than a worn or undersized tire. When picking tires, match the tire width to the wheel’s width within the range the tire is rated for, and keep the overall diameter close to what the vehicle was set up for.
Tread choice depends on the terrain. Aggressive tread gives bite on rock and mud but can be louder and wear faster on pavement. Sidewall damage from sharp rock is a common reason tires come off the bead, so inspect the sidewall and bead area after rough days.
- Match tire width to the wheel’s rated range
- Check sidewalls after sharp rock contact
- Replace valve stems during tire service when they show cracking
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70478516800 |
| Series | MR704 Bead Grip (704 Trail Series) |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 4.75 |
| Construction | One-piece cast 356 aluminum, T6 heat treatment |
| Finish | Matte Titanium |
| Style | Windowed |
Vehicle fitment
This wheel is universal fit and is not built for a particular vehicle. A universal fit wheel does not confirm clearance for any particular hub. Check the 6 on 135 bolt pattern, 87 center bore and 17×8.5 size against your vehicle, and measure your hub before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bead Grip is aimed at lower running pressures, so choose pressure within the tire’s rated range before airing down. Verify the 6 on 135 pattern and 87 center bore against the hub before mounting. A shop with wheel and tire experience should handle mounting and balancing if you have not worked on wheels before.
What’s included
Confirm the package contents before starting the installation.














