Overview
The Method Race Wheels 701 Trail Series 17×7.5 wheel, part number MRWMR70177554530, is a matte black windowed aluminum wheel with a 5 on 110 bolt pattern, center bore 65, offset 30 and backspacing 5.5. It is part of the MR701 Bead Grip series and is aimed at off-road trail vehicles.
The wheel is one-piece cast from 356 aluminum and T6 heat treated. Its patent pending Bead Grip feature helps the tire bead hold its seat at lower air pressures. A reinforced inner lip from race wheel design pairs with a safety hump on each bead seat to help stabilize the tire and guard against de-beading. Finite element analysis and field testing guided the design toward less weight and more strength. It is built for off-road racers and enthusiasts who run trucks and Jeeps hard.
Key features
- One-piece cast 356 aluminum with T6 heat treatment
- Patent pending Bead Grip technology for lower-pressure running
- Reinforced inner lip from race wheel design
- Safety humps on the inner and outer bead seat
- Matte black finish and windowed styling
- Designed with finite element analysis and field testing
Hub fit and clearance
Confirm the hub pattern before buying, since the wheel will not mount on a different bolt pattern without an adapter. The center bore of 65 must suit the hub so the wheel centers correctly, and the offset of 30 determines how far the outer lip sits from the suspension. Check both before the first mount.
A test fit with a mounted tire is the most reliable check. Turn the steering fully in both directions, compress and extend the suspension, and look for rubbing at the caliper, brake line and inner fender. Repeat the check after changing tire size.
Torque lug nuts in a star pattern and re-check them after the first drive. Wheel spacers and hub rings can help with centering or clearance, but each change alters load on the bearings, so confirm the setup is suited to the vehicle.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70177554530 |
| Series | 701 Trail Series, MR701 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 7.5 inches |
| Bolt pattern | 5 on 110 |
| Center bore | 65 |
| Offset | 30 |
| Backspacing | 5.5 |
| Style | Windowed |
| Finish | Matte Black |
| Construction | Aluminum, one-piece cast 356, T6 heat treated |
Vehicle fitment
No vehicle is named for this 17×7.5 wheel. Fitment is labeled Universal Fit, but the 5 on 110 bolt pattern, center bore 65 and offset 30 are what determine whether it mounts to a particular hub. Verify those values against your vehicle’s wheel specifications, and consult the manufacturer if they are not clear.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm brake and suspension clearance with a test fit before mounting tires, since offset changes where the wheel sits relative to the hub. Set tire pressure with the Bead Grip design in mind, which is aimed at lower pressures. A wheel and tire combination is safety-critical, so have it checked for clearance and seating before use.
What’s included
Confirm whether lug nuts and center caps are in the box before mounting, since a tire is needed separately.
Not included: A tire, plus any lug nuts or center caps you need.















