Overview
The Method Race Wheels 301 The Standard 17×8.5 in matte black, part number MRWMR30178580500, is a 17-inch aluminum spoke wheel for an 8 on 6.5 bolt pattern with a 131 center bore. It has 0 offset and 4.75 backspacing and belongs to the MR301 The Standard series.
The MR301 range is Method’s wheel line for off-road racing. The brand says each wheel was engineered for its intended use, and Finite Element Analysis and field tests guided development to reduce weight and add strength. Because the 8 on 6.5 pattern and 131 center bore are specific, confirm hub compatibility carefully.
Key features
- 17-inch diameter and 8.5-inch width
- Aluminum spoke design
- 8 on 6.5 bolt pattern
- 131 center bore
- Offset 0 and backspacing 4.75
- Matte black finish
Eight-lug wheel basics
Eight-lug wheels spread clamping force across more fasteners, so every stud and nut needs to seat evenly. Use hardware that matches the wheel’s seat style and thread, and clean the mounting surface before installation so dirt does not cause uneven pressure.
Center bore decides how the wheel locates on the hub. If the hub is smaller than the bore, a centering ring can help, and a poor fit may cause vibration at speed. Confirm both bore and bolt pattern before buying, since a close match is not always an exact one.
Off-road use can loosen lugs, so check torque after the first few trips and periodically afterward. Look for rust or pitting around the mounting face, and clean any buildup before remounting. Wheels that have been struck hard should be inspected for bends or cracks before continued use.
- Torque in a star pattern in stages
- Inspect the mounting face for rust
- Keep spare hardware on hand for trail trips
- Check clearance after tire changes
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30178580500 |
| Series | MR301 The Standard |
| Diameter | 17 inches |
| Width | 8.5 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | 0 |
| Backspacing | 4.75 |
| Construction | Aluminum |
| Style | Spoke |
| Finish | Matte black |
| Fitment field | Universal Fit, no vehicles named |
Vehicle fitment
No vehicle is named for this wheel, and the entry reads Universal Fit only. Confirm the 8 on 6.5 bolt pattern and 131 center bore against your vehicle before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bore is 131, verify hub centering before tightening the lugs. A hub-centric ring may be needed if the hub is smaller than the bore, and the wheel should sit flat against the hub before any torque is applied.
What’s included
This is a single wheel.
Not included: Confirm which lug nuts, center caps and tires you need before mounting.











