Overview
The Method Race Wheels 702 Series 17×8.5 in Matte Black, part number MRWMR70278516500, is a 17-inch aluminum spoke wheel with an 8.5-inch width and a 6 on 135 bolt pattern. It is part of the MR702 Bead Grip series and carries a matte black finish.
The line was developed for off-road racing. Each wheel is engineered for its intended use and was tested with Finite Element Analysis and field trials. Street versions of this design come in Diamond Cut / Clear or Matte Black, and this model is finished in Matte Black.
Key features
- Aluminum construction that the brand developed to reduce weight and add strength
- Spoke style with a matte black finish
- MR702 Bead Grip series
- Design checked with Finite Element Analysis and field testing, per the brand
- 17-inch diameter and 8.5-inch width
Checking hub fit before mounting
Hub fit comes first. Bolt pattern, center bore, offset and backspacing work together, and a mismatch in any one can cause vibration, rubbing or a wheel that does not seat square. Clean the hub face and remove rust or debris, then test-fit the wheel without a tire to see how it centers and how close it sits to the caliper and control arms. A hub-centric ring can close a small center bore gap, but it cannot correct a bolt pattern that does not match.
After mounting, tighten lug nuts in a star pattern and recheck torque after the first short drive and again after the first few trail runs. Aluminum wheels are sensitive to uneven clamping. Look for cracks around the spokes and the mounting face after hard impacts, and replace a bent wheel rather than straightening it, since straightening can hide fatigue damage.
- Match bolt pattern and center bore before mounting
- Test-fit with the planned tire at full steering lock
- Recheck lug torque after the first short drive
- Inspect spokes and mounting face after hard impacts
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70278516500 |
| Series | MR702 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 135 |
| Offset | 0 |
| Center bore | 87 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
It is a Universal Fit wheel, with no make, model or year named. Compare the 6 on 135 bolt pattern, offset 0, center bore 87 and backspacing 4.75 with your hub and clearances before ordering.
The bronze finish in this size uses a different part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify that the 87 center bore matches your hub before mounting, since a poor fit can cause vibration. Match the lug hardware to the 6 on 135 pattern and tighten to the torque your vehicle requires.
What’s included
The package holds a single wheel. Not included: Tires and mounting hardware; confirm what your installation needs before starting.














