Overview
The Method Race Wheels 702 Series 17×8.5 in Bronze, part number MRWMR70278516900, is a 17-inch aluminum spoke wheel with an 8.5-inch width and a 6 on 135 bolt pattern. It belongs to the MR702 Bead Grip series and is aimed at off-road owners who want a wheel built for that use.
Method Race Wheels describes its wheels as engineered for their intended use and checked through Finite Element Analysis and field tests. The stated goal is less weight with more strength, and this bronze model is a useful reference for anyone comparing 17-inch off-road wheels in this bolt pattern and backspacing.
Key features
- Aluminum construction, which the brand says is developed to minimize weight and increase strength
- Spoke design in a bronze finish
- MR702 Bead Grip series
- Developed through finite element analysis and field testing.
- 17-inch diameter with an 8.5-inch width
Spoke wheel fit and care
A center bore that matches the hub is what keeps a spoke wheel centered. When the bore fits the hub closely, the lug nuts carry the load instead of the studs taking all the stress. Clean the hub face and bore of rust, paint and grit before mounting, since trapped debris can throw the wheel slightly off center.
Choosing a tire for this wheel affects how it handles on the trail. Width and diameter change clearance at the fender, brake calipers and suspension parts, and lower pressures change the bead’s seating. Test fit with the tire you plan to use and recheck after any change.
Routine care helps spoke wheels last. Rinse mud from the spokes and the back of the wheel after trail use, and check the spoke joints for cracks or loose areas. Tighten lug nuts again once the first few drives are done, and replace any wheel that shows a crack near a spoke or the center section.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70278516900 |
| Series | MR702 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 135 |
| Offset | 0 |
| Center bore | 87 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Bronze |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for this wheel, and it carries a Universal Fit label. Match the 6 on 135 bolt pattern, offset 0, center bore 87 and backspacing 4.75 against your hub and tire clearance before ordering.
Other 702 Series sizes, bolt patterns and finishes are separate part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 87 center bore has to suit your hub, because a wheel that does not seat properly can vibrate or work loose. Use fasteners sized for the 6 on 135 pattern and torque them to your vehicle’s specification.
What’s included
This is a single wheel. Tires, valve stems and lug hardware are not part of the contents.














