Overview
The Method Race Wheels MR705 18×9 in Matte Black, part number MRWMR70589060500, is a split-spoke aluminum wheel with a 6 on 5.5 bolt pattern, 0 offset, 106 center bore and 5 backspacing. Method builds the MR705 Bead Grip line for drivers who run lower tire pressures on rough ground.
Bead Grip retention keeps the tire seated when pressure is lowered, which helps the tire conform to loose ground. The wheel has a reinforced inner lip and carries a lifetime structural warranty. Because it is marked Universal Fit, check it against your own hub and clearance.
Key features
- Patented Bead Grip technology that engages the tire bead for increased grip at low pressures.
- Solid A356 aluminum, heat treated to T6.
- Split 5-spoke layout with 10 windowed sections and a debossed METHOD logo on the face.
- Bead seats have a safety hump, described by Method as aggressive, to resist de-beading.
- Reinforced inner lip that Method says adds strength.
- A snap-in center cap carries the embossed Bead Grip logo from METHOD.
- A push-through cap version is offered for 8-lug applications.
- The wheel carries a lifetime structural warranty and a 2650 lbs. to 3640 lbs. load range.
Clearance with zero offset
Zero offset places the mounting face directly on the centerline of the wheel, so the tire sits at a fixed depth relative to the hub. Backspacing sets how far the wheel reaches toward the suspension, so caliper, spring and fender clearance should be checked once the tire is mounted.
Lowering the tire pressure can change the tire’s shape, so recheck clearance with the tire inflated and again after any suspension or brake work. Tire width matters as well, because a wider tire on the same wheel can rub where the sidewall flexes at full lock.
- Check caliper clearance with the tire mounted
- Look at spring and fender clearance at full lock
- Recheck clearance after suspension changes
- Keep the tire width in mind when choosing the wheel
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70589060500 |
| Series | MR705 Bead Grip |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | 0 |
| Center bore | 106 |
| Backspacing | 5 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Solid A356 aluminum with T6 heat treatment |
| Load rating | 2650 lbs. to 3640 lbs. |
Vehicle fitment
Use the 6 on 5.5 bolt pattern, 0 offset, 5 backspacing and 106 bore to judge fit. The wheel is marked Universal Fit, so a hub-centric ring may be needed if your hub is a different size than the 106 bore.
Check year, model and trim against your vehicle before buying.
Installation notes
Tire seating on a Bead Grip rim should be carried out by a technician familiar with the design. Once mounted, look at caliper, spring and fender clearance, since offset 0 and backspacing 5 place the face at a fixed depth.
What’s included
A snap-in center cap is included. Tires, lug nuts and valve stems are not included, so arrange those separately.












