Overview
A Method Race Wheels MR312 measuring 18 by 9 inches in Matte Black, part number MRWMR31289060518, is an aluminum split-spoke wheel from Method’s street range. Method ties the MR312 design to its 106 Beadlock, and the MR312 was introduced as a street wheel for 2018. Owners running it on a daily vehicle or a weekend off-road build get a modern look with a matte finish.
Around the lip, removable stainless steel bolts are protected against shearing, and the all-new v.3 Stree-Loc ring is the ring used in this version. The concave split-six spoke design stays uncluttered, and one spoke carries a subtle Method debossing. Sizes offered across the range are 17 and 18 inch.
Key features
- Concave split-six spoke design
- All-new v.3 Stree-Loc ring
- Removable stainless steel bolts around the lip, protected against shearing
- Subtle Method debossing on one spoke
- Aluminum construction with a Matte Black finish
Measuring the bolt pattern
Bolt pattern is the spacing of the lug holes on the hub, and it must match the wheel exactly. Measure from the center of one lug hole across to the center of the hole on the opposite side, then compare the result with the wheel’s bolt pattern before mounting. Measuring by eye is unreliable, and a wrong pattern will not seat the wheel at all.
The center bore is the hole in the middle of the wheel, and it should match the hub pilot so the wheel centers on the hub. Offset and backspacing decide how the tire sits relative to the fender and brakes, so check those figures against your suspension and brake clearance. Where hub and wheel figures differ, rely on the physical hub measurement rather than a single number.
- Measure both the bolt pattern and the center bore
- Check offset against fender and brake clearance
- Use a caliper to measure the hub pilot
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR31289060518 |
| Series | MR312 |
| Diameter | 18 inch |
| Width | 9 inch |
| Bolt pattern | 5 on 5.5 |
| Center bore | 106 |
| Offset | 18 |
| Backspacing | 5.75 |
| Style | Split spoke |
| Finish | Matte Black |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for this wheel, so no year, make, model or trim is attached. It is a universal fit wheel. The bolt pattern appears as 5 on 5.5 in the specifications and as 6×5.5 in the product name, so measure your hub before ordering. Compare center bore 106 and offset 18 with your application as well.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A bolt-on center cap comes with the wheel, along with its fastening hardware.
Not included: Tires, lug nuts and valve stems are not included with the wheel.










